--- title: "Network Setting" slug: "network-setting-11" updated: 2026-07-10T03:40:34Z published: 2026-07-10T03:40:34Z canonical: "knowledge.akuvox.com/network-setting-11" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Network Setting ## Network Status To check the network status on the web **Status > Network Information** interface. ![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87%28184%29.png) ## Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. Set it up on the **Network > Basic** interface. ![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87%28185%29.png) **Parameter Set-up**: - **DHCP**: DHCP mode is the default network connection. If the DHCP mode is selected, then the device will be assigned by the DHCP server with an IP address, subnet mask, default gateway, and DNS server address automatically. - **Static IP**: When static IP mode is selected, the IP address, subnet mask, default gateway, and DNS server address have to be manually configured according to the actual network environment. - **IP Address**: Set up the IP address when the static IP mode is selected. To access the device’s web settings with the IP, your computer should be on the same local network as the device. - **Subnet Mask**: A subnet mask tells your device which IP addresses are part of your local network and which ones are not. For example, if the subnet mask is 255.255.255.0, it means that devices with similar starting IPs (like 192.168.1.x) are in the same network. - **Default Gateway**: The gateway is like a bridge between your device and other networks, such as the internet. Usually, it’s the IP address of your router. - **Preferred/Alternate DNS**: Domain Name System(DNS) is the overall system or network that handles the translation of domain names (like www.example.com) into IP addresses (like 192.0.2.1), which computers use to identify each other on a network. The device connects to the alternate DNS server when the primary one is unavailable. ## Device Deployment in Network To facilitate device control and management, configure Akuvox intercom devices with details such as location, operation mode, address, and extension numbers. Set it up on the **Network > Advanced > Connect Setting** interface. ![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87%28186%29.png) **Parameter Set-up**: - **Server Mode**: It is automatically set up according to the device’s connection with a specific server in the network, such as **SDMC, Cloud**, or **None**. **None** is the default factory setting, indicating the device is not in any server type. - **Discovery Mode**: enable the discovery mode of the device so that it can be discovered by other devices in the network, and turn it off if you want to conceal the device so as not to be discovered by other devices. - **Device Address**: Specify the device address by entering device location information from left to right: Community, Building, Unit, Floor, and Room in sequence. - **Device Extension**: Enter the device extension number for the device you installed. - **Device Location**: Enter the location in which the device is installed and used. ## NAT Setting Network Address Translation(NAT) lets devices on a private network use a single public IP address to access the internet or other public networks. NAT saves the limited public IP addresses and hides the internal IP addresses and ports from the outside world. To register SIP accounts on third-party servers in a Wide Area Network(WAN), you need to enable the RPort feature on the intercom devices to establish a stable connection. Set it up on the web **Account > Advanced > NAT** interface. ![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87%28187%29.png) **Parameters Set-up**: - **UDP Keep Alive Messages**: If enabled, the device will send out the message to the SIP server so that the SIP server will recognize if the device is in online status. - **UDP Alive Messages Interval**: Set the message sending time interval from 5-60 seconds; the default is 30 seconds. - **RPort**: Enable the RPort when the SIP server is in WAN (**Wide Area Network**). ## Device Web HTTP Setting This function manages device website access. The device supports two remote access methods: HTTP and HTTPS (encryption). Set it up on the web **Network > Advanced > Web Server** interface. ![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87%28188%29.png) **Parameters Set-up**: - **HTTP Enabled**: Set whether HTTP access to the device web page is allowed. It is enabled by default. - **HTTPS Enabled**: Set whether HTTPS access to the device web page is allowed. It is enabled by default. - **HTTP Port**: Set up the port for the HTTP access method. 80 is the default port. - **HTTPS Port**: Set up the port for the HTTPS access method. 443 is the default port.