Network Setting

Prev Next

To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server.

To set it up, go to Network > Basic interface.

  • DHCP: DHCP mode is the default network connection. If the DHCP mode is selected, then the device will be assigned by the DHCP server with an IP address, subnet mask, default gateway, and DNS server address automatically.

  • Static IP: When static IP mode is selected, the IP address, subnet mask, default gateway, and DNS server address have to be manually configured according to the actual network environment.

  • IP Address: Set up the IP address when the static IP mode is selected. To access the device’s web settings, your computer should be on the same local network as the device.

  • Subnet Mask: A subnet mask tells your device which IP addresses are part of your local network and which ones are not. For example, if the subnet mask is 255.255.255.0, it means that devices with similar starting IPs (like 192.168.1.x) are in the same network.

  • Default Gateway: The gateway is like a bridge between your device and other networks, such as the internet. Usually, it’s the IP address of your router.

  • Preferred/Alternative DNS Server: Domain Name System(DNS) is the overall system or network that handles the translation of domain names (like www.example.com) into IP addresses (like 192.0.2.1), which computers use to identify each other on a network. The device connects to the alternate DNS server when the primary one is unavailable.

LTE Wireless Connection

The LTE module enables cellular network connectivity for the device in areas where wired networks are unavailable, particularly beneficial for installations in older buildings.

Only WR01-L has an LTE module.

Set this feature up on the Network > Basic interface. It is disabled by default.

  • Enabled: The function is enabled by default.

  • SIM Card Status: Display whether a SIM card is inserted.

  • Signal Strength: Indicate the network connection.

    • None: No SIM card inserted or the SIM card is not properly inserted, unable to detect signal.

    • Weak: The network signal is poor, typically when the signal strength is below -100 dBm.

    • Fair: The network signal is average, usually when the signal strength is between -90 and -100 dBm.

    • Good: The network signal is good, generally when the signal strength is between -70 and -90 dBm.

    • Excellent: The network signal is excellent, typically when the signal strength is between -50 and -70 dBm.

  • Cellular Data Enabled: Set whether to enable the use of LTE mobile data. This option is only available when LTE Enabled is turned on. When disabled, the device will not use APN data for network access.

  • Data Usage: Available only when cellular data is enabled. It shows the total mobile data usage for the current month, calculated from the 1st day to the last day of the month.

  • Access Point: Select the access point or click Add to add a new one.

    Fill in the following information before clicking Save. These can be found from the network provider of your SIM card.

SNMP Setting

Simple Network Management Protocol(SNMP) is a protocol for managing IP network devices. It allows network administrators to monitor devices and receive alerts for attention-worthy conditions. SNMP provides variables describing system configuration, organized in hierarchies and described by Management Information Bases (MIBs).

To set it up, go to the Network > Advanced > SNMP interface.

  • Trusted IP: The allowed SNMP server address. It can be an IP address or any valid URL domain name.

Device Web HTTP Setting

This function manages device website access. The device supports two remote access methods: HTTP and HTTPS (encryption).

To set it up, go to the Network > Advanced > Web Server interface.

  • HTTP Redirect: It is enabled by default, which means all HTTP requests will automatically be redirected to HTTPS. If it is disabled, the device's web interface can be accessed using HTTP directly.

VLAN Setting

A Virtual Local Area Network (VLAN) is a logical group of nodes from the same IP domain, regardless of their physical network segment. It separates the layer 2 broadcast domain via switches or routers, sending tagged packets only to ports with matching VLAN IDs. Utilizing VLANs enhances security by limiting ARP attacks to specific hosts and improves network performance by minimizing unnecessary broadcast frames, thereby conserving bandwidth for increased efficiency.

Set it up on the Network > Advanced > VLAN Setting interface.

  • Priority: The VLAN priority for the designated port.

  • VLAN ID: The VLAN ID for the designated port.