PBX Feature

PBX Configuration on The Device

To set it up, go to Settings > Advance > PBX screen.

Enable PBX Service

On the PBX screen, tap the Setting icon in the upper right corner to enable the PBX. After turning on the PBX server, you can check the server address and port in the upper left corner.

• Media Mode:

  • Default: Select it when the intercom devices are deployed in the same LAN network.

  • Bypass: Select it when the devices are deployed in different LAN networks where PBX serves as a bridge or a media for the network data transmission.

Manage PBX Accounts

You can check the basic PBX information like PBX account status by tapping in the upper right corner. Then, select the desired row by tapping .

• Status: Indicate whether the account is registered or not.

• Username: Enter the extension number registered onto the SIP server.

• Password: Enter the password of the corresponding users.

• Display Name: Enter the display name of this account, which will be shown on other devices when making calls.

• Enabled Status: Activate or deactivate the SIP account.

• Call In/Call Out: The calling status of this account.

• Calling Party: The caller number.

• Called Party: The callee number.

Manage PBX Groups

Tap Group in the upper right corner on the PBX screen to add a new ring group or edit the existing group.

Tap the Add icon in the upper right corner to add a group.

• Group Name: Name the group.

• Quick Dial: Enter the number used to call members of the group.

• Member: Select the registered number from the number list by pressing the area below Member.

PBX Configuration on the Web Interface

Enable PBX Service

To set up the PBX feature on the web, go to the PBX > Basic interface.

• PBX Status: Indicate whether the PBX is on or off.

• Media Mode:

  • Default: Select it when the intercom devices are deployed in the same LAN network.

  • Bypass: Select it when the devices are deployed in different LAN networks where PBX serves as a bridge or a media for the network data transmission.

• PBX Port: Display the port of the server.

Manage PBX Accounts

You can add or edit accounts on the PBX > Basic interface.

• Username: Enter the extension number registered onto the SIP server.

• Password: Enter the password of the corresponding users.

• Display Name: Enter the display name of this account, which will be shown on other devices when making calls.

• Status: Indicate whether the account is registered or not.

Manage PBX Groups

To set up PBX groups, go to the PBX > Ring Group interface. Click +Add or to create or modify a group.

• Group Name: Name the group.

• Quick Dial: Enter the number used to call members of the group.

• Member: Select the registered number from the number list.