Personalize Your System

Prev Next

Connect to the Internet

You can modify the Wi-Fi network or connect the device to a local area network (LAN) anytime. Network changes may affect certain functions. To ensure proper operation, consult your service provider before modifying the network settings.

NOTE:

All panels within the family should be in the same local network to ensure the proper communication. To use SIP call and BelaHome app’s remote control function, the panels must be connected to the cloud and the Internet.

Change your Wi-Fi network

  1. Swipe down from the top edge of any screen, and tap > Wi-Fi.

  2. Toggle the Use Wi-Fi button to on.  

  3. Select the desired network.

  4. Enter the password, and tap Confirm.

C:/Users/我喻/Desktop/Akuvox/任务稿/wifi.pngwifi

TIP:

You can tap the connected Wi-Fi name to view the HyPanel Ultra’s IP address and configure a static IP if needed.

_data_code_DOWNLOAD_screen - 2025-05-28T141734.925

Configure LAN network

To configure a LAN network, do the following.

  1. Swipe down from the top edge of any screen, and tap > Ethernet.

  2. On the Network view, do any of the following:

  • Toggle on DHCP feature, and the device will be assigned IP address automatically.

  • Toggle off DHCP feature, and enter IP Address, Subnet Mask, Gateway, Preferred DNS Server, and Alternate DNS Server manually.

C:/Users/我喻/Desktop/Akuvox/任务稿/ehternet2.pngehternet2

Configure network priority

Starting from version 281.1.35.8, you can set the preferred network when both Wi-Fi and Ethernet are connected.

To set the priority, go to > Installer Settings(default password: 000000) > Network Priority Setting to choose which network the device should prioritize for communication.

Put HyPanel Ultra in standby mode

To put HyPanel Ultra in standby mode quickly, swipe down from the top edge of any screen to open Control Center, then tap .

You can customize how long the device takes to enter the standby mode by tapping > Display > Screen Saver > Go into Standby. For example, if you choose 1 min, the HyPanel Ultra will enter standby mode in 1 minute of inactivity.

Change screen saver settings

In Screen Saver Settings, you can turn the screen saver on or off, and choose its style.  

  1. Swipe down from the top edge of any screen, and tap > Display > Screen Saver.

_data_code_DOWNLOAD_screen (15)

  1. Do any of the following:

  • Turn on or off the the toggle next to Screen Saver On.

    When it is enabled, HyPanel Ultra in standby mode will display photos and images; when disabled, the display will just stay off.

  • Schedule the screen saver to turn on automatically by setting Screen Saver Times.

  • Choose a screen saver style.

    Select Photo Wall if you want to display images.

TIP:

To add your preferred photos, please log into the BelaHome app and go to Me > Wall Paper.

NOTE:

When the panel is used in a GRMS project, any screensaver wallpapers sent from the GRMS system will override the default wallpapers on the panel.

Set up Do Not Disturb

To avoid interruptions from calls, messages, or notifications, enable Do Not Disturb(DND).

All calls and notifications will be silenced during the set period, while the alarm still rings.

Quickly Turn DND on or off

To quickly turn the DND feature on and set its duration, swipe down from the top edge of any screen, tap , then select the desired duration.

When DND is enabled, the icon will change accordingly. Tap the icon again to disable DND.

NOTE:

If the DND period set here overlaps with a Specific Time DND, the effective DND period will be the combined duration of both settings.

IMG_256

IMG_256

Schedule the DND to turn on automatically

To schedule DND to turn on automatically at certain times, do the following:

  1. Swipe down from the top edge of any screen, and tap > DND.

  2. Toggle on DND.

  3. Toggle on Specific Time.

  4. Set the DND start time and end time. DND will be activated automatically during the designated period and deactivated outside these hours.

  5. Specify the number of times the DND schedule will be repeated. The default setting is 1 time.

C:/Users/我喻/Desktop/Akuvox/任务稿/DND.pngDND

Protect your HyPanel Ultra  

For better security, use screen lock or settings lock to prevent unintended access to your device or the settings screen.

System lock and Settings screen lock

Enable lock

  1. Swipe down from the top edge of any screen, and tap > System Lock.

C:/Users/我喻/Desktop/Akuvox/任务稿/截图/81lock.png81lock

  1. Choose your preferred password option from Digital Password and Gesture Password, and follow the onscreen instructions to set up.

  2. Select where to apply the password.

C:/Users/我喻/Desktop/Akuvox/任务稿/截图/onlock81.pngonlock81

NOTE:

The Screen Lock and Setting Lock use the same password. When both are active, you only need to input the password once to unlock both the device and the Settings screen.

Delete and modify passwords

  1. On the > System Lock screen, tap the password type you want to modify or delete.

  2. Select the desired option and follow the onscreen instructions.

_data_code_DOWNLOAD_screen - 2025-05-28T173821.317

Forgot password

To clear the forgotten current password, tap Forgot Password on the password required screen and follow the onscreen instructions. Two resetting options are provided based on your cloud connection status.

C:/Users/我喻/Desktop/Akuvox/任务稿/forgot password.pngforgot password

  • Via reset email

    If you’ve registered the administrator account and ensure that the devices are connected to the Internet, a password reset email will be sent to the family’s administrator email address once you tap Forgot Password. Follow the instructions included to clear the password.

  • On the user web portal

    Log in to the user web portal, find the desired panel, and tap its > Reset > Reset Panel screen lock password.

Installer Settings screen lock

To prevent unauthorized changes, the Installer Settings screen is password-protected by default which is 000000. This screen includes functions such as KNX Programming, Discovery Settings, Room Number, Network Priority Setting, Bluetooth, and more.

Configure proximity sensor settings

The panel features a built-in proximity sensor that detects when someone approaches. For example, it can automatically wake the screen as you get near, offering a touch-free and responsive experience.

To adjust the sensor settings:

  1. Swipe down from the top edge of any screen to open the Control Center.

  2. Tap  > Motion Status.

  3. Do any of the following:

  • Enable/Disable the proximity sensor.

  • Adjust the sensitivity to set the detection distance.

_data_code_DOWNLOAD_screen - 2025-05-28T163436.051

Manage spaces and rooms

You can customize your home floor plan by adding new floors and rooms. You can also reorder the room cards to match your preferences.

Create new floors or rooms

To better match your actual floor plan, you can add more detailed floors or rooms by following these steps:

  1. Tap at the top of the Home screen.

_data_code_DOWNLOAD_screen (59)

  1. Tap in the upper right corner.

  1. On the Space Management screen, tap .

_data_code_DOWNLOAD_screen - 2026-02-11T160135.310

  1. Based on your needs, do any of the following.

  • Tap at the top to add a new space.

_data_code_DOWNLOAD_screen - 2026-02-11T160311.569

_data_code_DOWNLOAD_screen - 2026-02-11T160417.312

  • Tap next to a space to add a new room under it.

_data_code_DOWNLOAD_screen - 2026-02-11T160417.312

_data_code_DOWNLOAD_screen - 2026-02-11T161303.446

  • Tap to rename a space or room.

  • Tap > > Save to delete spaces or rooms.

  • Tap to return to the room list, then tap to set a room/space picture.

_data_code_DOWNLOAD_screen - 2026-02-11T161505.476

Reorder room cards

TIP:

You can hide any room and device via the user web portal by going to Devices > > Device permissions > Rooms.

To reorder the room cards, do as the following.

  1. Tap at the top of the Home screen.

  1. Tap in the upper right corner.

  2. Hold, drag, and drop the rooms to reorder them.

  3. The order of room cards will change accordingly.

Batch configuration template

Speed up large-scale deployments by saving a home’s full configuration as a reusable template. The system can store up to 100 templates.

Applying a template automatically synchronizes:

  • Room structures and device names

  • UI layouts and system settings

  • Scenes and device associations

NOTE:

  • When a template is applied, the room structure will match the template exactly. Rooms not in the template are removed, and their devices are moved to the "Others" space.

  • Any existing scenes not included in the template will be deleted upon import.

  • The system attempts to match devices automatically. Successfully matched devices show a Correct status.

Upload a template

To save your current home settings to the cloud:

  1. Swipe down from the top edge of any screen, and go to > Installer Settings(default password: 000000) > Batch Configuration.

  2. Tap Template Upload.

  1. Name the template and tap Confirm.

Apply a template

  1. Swipe down from the top edge of any screen, and go to > Installer Settings(default password: 000000) > Batch Configuration.

  2. Tap Template Download.

  3. Select the desired template from the list.

  4. Review Import:

  • Success: If all configurations match, tap Finish.

  • Manual Re-match: If a device is matched automatically but you wish to change it, select the gateway, tap to unmatch it, and follow the manual steps below.

_data_code_DOWNLOAD_screen - 2026-03-26T174036.752

Handle Mismatched Devices

If the system cannot automatically find a device, an Error Icon will appear:

  1. Tap the card marked with the error.

_data_code_DOWNLOAD_screen - 2026-03-26T171503.759

  1. Select the mismatched device.

_data_code_DOWNLOAD_screen - 2026-03-26T171716.950

  1. Use the Test options (e.g., On/Off) to physically identify the device.

NOTE:

Test functions are supported only for devices with On/Off control or curtain/shade devices.

_data_code_DOWNLOAD_screen - 2026-03-26T173518.654

  1. Tap Association to manually link the device to the template slot.

  2. Tap Save > Finish once all required devices are associate