Configure LAN network
You can change a LAN network if needed.
Swipe down from the top edge of any screen to open Control Center, and tap
> Ethernet.The DHCP feature is enabled by default, so the device will automatically receive an IP address.
To configure the network manually, turn off the DHCP feature and enter the IP Address, Subnet Mask, Gateway, Preferred DNS Server, and Alternate DNS Server.
Put HyPanel Lux in standby mode
To put HyPanel Lux in standby mode quickly, swipe down from the top edge of any screen, and tap 
.
You can customize how long the device takes to enter the standby mode by tapping > Display > Screen Saver > Go into Standby. For example, if you choose 1 min, then HyPanel Lux will enter standby mode in 1 minute of inactivity.
Change the screen saver settings
In Display settings, you can turn the screen saver on or off, and choose the screen saver style.
Swipe down from the top edge of any screen, then tap
> Display > Screen Saver.
Do any of the following:
Turn on or off the the toggle next to Screen Saver On.
When it is enabled, HyPanel Lux in standby mode will display photos and images; when disabled, the display just stays off.
Schedule the screensaver to turn on automatically by setting Screen Saver Times.
Choose a screen saver style.
Select Photo Wall if you want to display images.
To add your preferred photos, see here.
Set up Do Not Disturb
If you do not want to be disturbed by calls, messages, or notifications, you can turn on the Do Not Disturb (DND) feature.
Quickly turn DND on or off
You can manually turn the DND feature on by swiping down from the top edge of any screen, and tapping 
. The icon will turn to 
when the DND is enabled. Tap the icon again to turn the DND off.
This feature can also be set up by going to 
> DND.
Schedule the DND to turn on automatically
To schedule a DND to turn on automatically at certain times, do as the following:
Swipe down from the top edge of any screen to open Control Center,
and tap > DND.Toggle on DND.
Toggle on Specific Time.
Set the DND start time and end time. DND will be activated automatically during the designated period and deactivated outside these hours.
Specify the number of times the DND schedule will be repeated. The default setting is 1 time.
Once you set the times, all the calls and notifications will be silenced in this period, while the alarm still rings.
Protect your HyPanel Lux
For better security, use screen lock or settings lock to prevent unintended access to your device or the settings screen.
Set up screen lock
Swipe down from the top edge of any screen to open Control Center, and tap
> System Lock.Do any of the following:
Tap PIN or/and Pattern and follow the onscreen instructions to set a screen lock directly.
Toggle on Screen Lock to set a password to unlock the screen when you wake it, and follow the onscreen instructions.
Toggle on Setting Lock to prevent unwanted access to the Settings screen, and follow the onscreen instructions.
NOTE:
The Screen Lock and the Settings Lock share the same pattern password. When both of the locks are enabled, you only need to draw the pattern password once to access the device and the Settings screen.
Clear or change screen lock
To modify or delete passwords, tap the relevant password type, choose between Change Password and Clear Password, and follow the onscreen instructions.
Forgot password
To clear the forgotten current password, tap Forgot Password on the password required screen and follow the onscreen instructions. Two resetting options are provided based on your cloud connection status.
Via reset email
If you’ve registered the administrator account and ensure that the devices are connected to the Internet, a password reset email will be sent to the family’s administrator email address once you tap Forgot Password. Follow the instructions included to clear the password.
On the user web portal
Visit the user web portal to reset your password. You can see here for the detailed instructions.