--- title: "Project Management" slug: "pm-1" updated: 2026-08-11T06:20:45Z published: 2026-08-17T08:49:52Z canonical: "knowledge.akuvox.com/pm-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Project Management The **Project** interface allows you to manage all projects, including viewing community project details, creating single-tenant projects, and managing layout templates. ## ## View Projects and Details - Select **Community** or **Single-tenant** to view a list of all projects of that type along with key summary data. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-mqegasta.png) - To view comprehensive information such as home units, linked devices, and associated end users, click the **Detail** button. - **Layout:** Click to view a home’s floor plan, devices, and configuration settings. - **Install:** Click to export installation codes required for cloud connection. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-0iac83mf.png) ## Create Single-Tenant Projects You can create single-tenant projects either individually or in batches. Only installers can create community projects. ### ### Create an Individual Project 1. Go to **Project > Single-tenant > Add > New Projects**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-xaf2niiy.png) 1. Enter the required information. Ensure the address is accurate to enable devices to access precise weather data. 2. Click **Submit**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-8b6vb5l2.png) 1. Click **Detail > Add New Home** to add a home to the project. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-ydtkgcv7.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-0lw7flb3.png) 1. Enter the home details and configure the settings as needed. Click **Submit**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-oipgy7qz.png) | **Configuration** | **Description** | | --- | --- | | Home Name | Name the home | | Layout Template | Optional. Apply a template or customize the layout later. | | Home Center MAC | - Required for Local Mode to enable automatic cloud connection. - Not required if using Installation Code. | | SIP Call or IP Call | Optional. Call method between HyPanel and door phones: - SIP Call – for devices on different networks. - IP Call – for devices on the same LAN. | | Add Administrator | Add the family’s administrator account. > [!WARNING] > **TIP:** > > The administrator account can be changed or deleted after after it has been added. | ### ### Create Multiple Projects in Batch This feature is mainly used for Kit packages but also supports fast creation of non-Kit projects. 1. Go to **Project > Single-tenant > Add > Batch create Kit package projects**. 2. Click **Download the Template**. Fill in the MAC addresses of the Home Center devices for each Kit package and save the file. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-vejm5zu3.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-vk96ftb8.png) 1. Click **Add Projects by batch** to upload the completed template. 2. Projects will be created automatically and listed under Single-tenant. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-1ejnv1p7.png) 1. A home will be automatically added to each project. > [!WARNING] > **TIP:** > > Each home’s MAC address is already registered in the cloud. Once devices connect to the Internet, they will automatically connect to the cloud. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-utxnaewx.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-8emnnr7v.png) ## Delete Your Projects You can only delete projects that you created. To delete a project: 1. Go to **Project > Single-tenant > Delete**. 2. Click **Confirm**. After deletion, all akubela panels in the project will be removed from the cloud and restored to factory settings. > [!NOTE] > **NOTE:** > > If the deleted project includes intercom devices, remember to remove their MAC addresses from your MAC library on the SmartPlus Cloud. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-owzmzarn.png) ## Manage Layout Templates A layout template includes floor plan, devices, SOS settings and zone settings. It can be applied to multiple homes in both community and single-tenant projects to streamline setup. ### ### Create a Layout Template You can create a layout exclusive to a specific home, and universal templates for homes with the same floor plan and devices - For a specific home: Go to **Project > Single-tenant > Detail > Layout.** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-2tn2l4ri.png) - For a universal template: Go to **Project > Single-tenant > Layout > Add**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-br4z9k42.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-3j6z9u9c.png) ### Configure the Layout Template 1. Edit or add rooms/floors, then click **Submit**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-d25kmog7.png) 1. Stay on the same page and add akubela panels. For detailed instructions, see [here](/v1/docs/dm-1#add-akubela-panels1). > [!NOTE] > **NOTE:** > > Door phones cannot be added to universal templates. To add door phones to a project, see [here](/v1/docs/dm-1#add-door-phones1). ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-vvltxpw9.png) 1. Set up Security Zones. > [!NOTE] > **NOTE:** > > This section applies to wired sensor settings and is available only on specific panel models included in the current layout. 1. Go to **Projects > Single-tenant > Detail > Layout > Zone > Edit.** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-3n28td8x.png) 1. Configure the following settings: ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-en5wrgtp.png) | **Configuration** | **Description** | | --- | --- | | Zone Name | Name the zone. | | Status | Enable/Disable the zone function. | | Location | Specify the sensor’s location. | | Type | Select the sensor type. | | Trigger Mode | Select the sensor contact state when voltage is off: - NC (Normally Closed) - NO (Normally Open) | 1. Add SOS Numbers. > [!NOTE] > **NOTE:** > > SOS settings can also be configured via the user web portal. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-cvp8tn5x.png) 1. Go to **Projects > Single-tenant > Detail > Layout > SOS > Edit**. 2. Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9HM6GOGO.png) in the desired number type field, and enter the SIP number. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-1adx8uss.png) 1. In the SOS Call Settings section, check the boxes for the required number types. These numbers will then be synchronized with the devices. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-y69fvkyf.png) 1. Specify the number of call attempts for the selected SOS contacts. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-ifij3ki2.png) 1. Select the outgoing call account: ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-gpiju22y.png) - **Account 1:** Typically the cloud account; available once cloud-connected. The SIP number is displayed on the panel’s Connect Status and About screens. - **Account 2:** Used for third-party SIP accounts configured via the device web interface. The account number will only appear on the device’s About screen. - **Auto:** The system automatically selects the optimal available account. ### ### Save as Layout Template If you have completed the home and device settings for a specific home without applying a template, you can save its layout as a template for future use. To save it: 1. Go to **Project > Single-tenant > Detail > Layout**. 2. Click **Save as template**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-9246i1dg.png) ### ### Apply Layout Template to Projects - Community project: Go to **Projects > Layout Template > Apply**, then select the desired project and the homes. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-4wwwefbf.png) - Single-tenant project: Go to **Projects > Single-tenant > Detail > Edit > Layout Template**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-3r0q20ar.png) ### Delete or Edit Layout Templates Modifying a layout template applied in a project will not change the original template. And changes to a template apply only to homes where installation is not completed. - For a specific home: Go to **Projects > Single-tenant > Detail > Layout**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-r8nzu3he.png) > [!NOTE] > **NOTE**: > > After installation, the home’s template can only be modified via the BelaHome app (Go to **Me > Family Management > Space Management)** or via HyPanel devices(Pro/Ultra/Supreme). - For a universal template: Go to **Projects > Layout Template**, then click **Info** to edit it, or click **Delete** to remove it. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/pm-image-gz4a9y6c.png)