This video shows how to power Akuvox devices via PoE/PoE+ or a 12V adapter and connect them to the network.
Includes wiring limits and practical setup guidance for installers.
Chapters
0:00--Overview
0:18--Use POE or POE+ for Network and Power Supply
1:18--Use a 12-Volt Adapter for Power Supply and RJ45 for Network
Note
The wiring distance for POE and POE+ is estimated under ideal conditions. Please adjust the actual wiring length based on the actual scenarios.
In most installations, connect Akuvox devices to a PoE switch (PoE/PoE+). Direct connection to a router is only possible if the router’s LAN port provides PoE output (PSE) with sufficient power; otherwise, use a PoE switch or a PoE injector.
As for the wire length when the device is powered by a 12V adapter, refer to the device’s quick guide.