Connect to the Internet
Typically, the network is configured by your service provider during installation. You can modify the Wi-Fi network or connect the device to a local area network (LAN) anytime, be aware that it may affect certain functions. To ensure continued proper operation, please check with your service provider before making any network changes.
NOTE:
All panels within the family should be in the same local network to ensure the proper communication. If you need to use SIP call and BelaHome app’s remote control function, panels must be connected to the cloud and Internet.
Change your Wi-Fi network
Swipe down from the top edge of any screen, and tap
> Wi-Fi.Toggle the Use Wi-Fi button to on.
Select the desired network.
Enter the password, and tap Confirm.

TIP:
You can tap the connected Wi-Fi name to view the device’s IP address and configure a static IP if needed.
Configure LAN network
To configure a LAN network, do the following.
Swipe down from the top edge of any screen, and tap
> Ethernet.On the Network view, do any of the following:
Toggle on DHCP feature, and the device will be assigned IP address automatically.

Toggle off DHCP feature, and enter IP Address, Subnet Mask, Gateway, Preferred DNS Server, and Alternate DNS Server manually.

Configure network priority
When both Wi-Fi and Ethernet are connected, you can set which network the device should prioritize.
To set the priority, go to
> Installer Settings (default password: 000000) > Network Priority Setting to choose which network the device should prioritize for communication.

Put HyPanel Elite 10 in standby mode
To put HyPanel Elite 10 in standby mode quickly, swipe down from the top edge of any screen to open Control Center, then tap
.
You can customize how long the device takes to enter the standby mode by tapping
> Display > Screen Saver > Go into Standby. For example, if you choose 1 min, the HyPanel Elite 10 will enter standby mode in 1 minute of inactivity.

Change screen saver settings
In Screen Saver Settings, you can turn the screen saver on or off, and choose its style.
Swipe down from the top edge of any screen, and tap
> Display > Screen Saver.

Do any of the following:
Turn on or off the the toggle next to Screen Saver On.
When it is enabled, HyPanel Elite 10 in standby mode will display photos and images; when disabled, the display will just stay off.
Schedule the screen saver to turn on automatically by setting Screen Saver Times.
Choose a screen saver style.
Select Photo Wall if you want to display images.
TIP:
To add your preferred photos, please log into the BelaHome app and go to Me > Wall Paper.
Set up Do Not Disturb
To avoid interruptions from calls, messages, or notifications, enable Do Not Disturb(DND).
All calls and notifications will be silenced during the set period, while the alarm still rings.
Quickly Turn DND on or off
To quickly turn the DND feature on and set its duration, swipe down from the top edge of any screen, tap
, then select the desired duration.
When DND is enabled, the icon will change accordingly. Tap the icon
again to disable DND.
NOTE:
If the DND period set here overlaps with a Specific Time DND, the effective DND period will be the combined duration of both settings.


Schedule the DND to turn on automatically
To schedule DND to turn on automatically at certain times, do the following:
Swipe down from the top edge of any screen, and tap
> DND.Toggle on DND.
Toggle on Specific Time.
Set the DND start time and end time. DND will be activated automatically during the designated period and deactivated outside these hours.
Specify the number of times the DND schedule will be repeated. The default setting is 1 time.

Protect your HyPanel Elite 10
For better security, use screen lock or settings lock to prevent unintended access to your device or the settings screen.
System lock and Settings screen lock
Enable lock
Swipe down from the top edge of any screen, and tap
> System Lock.

Choose your preferred password option from Digital Password and Gesture Password, and follow the onscreen instructions to set up.
Select where to apply the password.

NOTE:
The Screen Lock and Setting Lock use the same password. When both are active, you only need to input the password once to unlock both the device and the Settings screen.
Delete and modify passwords
On the
> System Lock screen, tap the password type you want to modify or delete. Select the desired option and follow the onscreen instructions.

Forgot password
To clear the forgotten current password, tap Forgot Password on the password required screen and follow the onscreen instructions. Two resetting options are provided based on your cloud connection status.

Via reset email
If you’ve registered the administrator account and ensure that the devices are connected to the Internet, a password reset email will be sent to the family’s administrator email address once you tap Forgot Password. Follow the instructions included to clear the password.
On the user web portal
Log into the user web portal, find the desired panel, and tap its
> Reset > Reset Panel screen lock password.
Installer Settings screen lock
To prevent unauthorized changes, the Installer Settings screen is password-protected by default which is 000000. This screen includes functions such as KNX Programming, Discovery Settings, Room Number, Network Priority Setting, Bluetooth, and more.
Configure proximity sensor settings
The panel features a built-in proximity sensor that detects when someone approaches. For example, it can automatically wake the screen as you get near, offering a touch-free and responsive experience.
To adjust the sensor settings:
Swipe down from the top edge of any screen to open the Control Center.
Tap
> Motion Status.Do any of the following:
Enable/Disable the proximity sensor.
Adjust the sensitivity to set the detection distance.

Manage spaces and rooms
You can customize your home floor plan by adding new floors and rooms. You can also reorder the room cards to match your preferences.
Create new floors or rooms
To better match your actual floor plan, you can add more detailed floors or rooms by following these steps:
Tap
at the top of the Home screen.

Tap
in the upper right corner.

On the Space Management screen, tap
.

Based on your needs, do any of the following.
Tap
at the top to add a new space.


Tap
next to a space to add a new room under it.


Tap
to rename a space or room.Tap
>
> Save to delete spaces or rooms.Tap
to return to the room list, then tap
to set a room/space picture.

Reorder room cards
TIP:
You can hide any room and device via the user web portal by going to Devices >
> Device permissions > Rooms.
To reorder the room cards, do as the following.
Tap
at the top of the Home screen.

Tap
in the upper right corner. Hold, drag, and drop the rooms to reorder them.
The order of room cards will change accordingly.
Batch configuration template
Speed up large-scale deployments by saving a home’s full configuration as a reusable template. The system can store up to 100 templates.
Applying a template automatically synchronizes:
Room structures and device names
UI layouts and system settings
Scenes and device associations
NOTE:
When a template is applied, the room structure will match the template exactly. Rooms not in the template are removed, and their devices are moved to the "Others" space.
Any existing scenes not included in the template will be deleted upon import.
The system attempts to match devices automatically. Successfully matched devices show a Correct status.
Upload a template
To save your current home settings to the cloud:
Swipe down from the top edge of any screen, and go to
> Installer Settings(default password: 000000) > Batch Configuration.Tap Template Upload.

Name the template and tap Confirm.
Apply a template
Swipe down from the top edge of any screen, and go to
> Installer Settings(default password: 000000) > Batch Configuration.Tap Template Download.
Select the desired template from the list.
Review Import:
Success: If all configurations match, tap Finish.
Manual Re-match: If a device is matched automatically but you wish to change it, select the gateway, tap
to unmatch it, and follow the manual steps below.

Handle Mismatched Devices
If the system cannot automatically find a device, an Error Icon will appear:
Tap the card marked with the error.

Select the mismatched device.

Use the Test options (e.g., On/Off) to physically identify the device.
NOTE:
Test functions are supported only for devices with On/Off control or curtain/shade devices.

Tap Association to manually link the device to the template slot.
Tap Save > Finish once all required devices are associate

> Device permissions > Rooms.