--- title: "Register a Third-Party SIP Account on HyPanel" slug: "register-a-third-party-sip-account-on-hypanel" updated: 2025-09-18T07:14:55Z published: 2025-09-18T07:14:55Z canonical: "knowledge.akuvox.com/register-a-third-party-sip-account-on-hypanel" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Register a Third-Party SIP Account on HyPanel If your project uses an external SIP server, you can register a third-party SIP account via the HyPanel device web portal to make calls. ## Before Getting Started 1. Make sure you have the following details from your SIP server: - SIP account name - Password - Server address - Port number 1. Find your HyPanel’s IP address on **Settings > System Settings > About**. ## Steps 1. Open a browser, enter the HyPanel’s IP address, and log in. The default username and password are both *admin*. 2. In the device web portal, find the target panel, and click **Setting** at the bottom left. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片1(36).png) 1. Go to **Account** page and enter the following: - **Display Name:** The name shown on the device during calls. - **Register Name / User Name / Password / SIP Server Address / SIP Server Port:** Provided by your SIP server. ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1758179519726.png) ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/65.-register-a-third-party-sip-account-on-hypanel-image-7mhsfqof.png) 1. (Optional) Enable Outbound Proxy Server, and enter the proxy address and port number. > [!WARNING] > **TIP:** > > The outbound proxy server forwards SIP messages from the HyPanel to the SIP server. Use an outbound proxy when: > > - Your SIP provider requires it, > - Direct registration fails due to firewall or NAT restrictions, or > - It’s needed for load balancing or redundancy. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/65.-register-a-third-party-sip-account-on-hypanel-image-jekhbzv4.png) 1. Return to the SIP Account section and turn on **Account Enable**. When Status changes to “Registered”, the SIP account is successfully configured. ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/65.-register-a-third-party-sip-account-on-hypanel-image-qk675c0l.png)