--- title: "Relay Setting" slug: "relay-setting-13" updated: 2025-02-18T03:13:52Z published: 2025-02-18T03:23:14Z canonical: "knowledge.akuvox.com/relay-setting-13" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Relay Setting ## Local Relay A local relay is the relay output built into the intercom device. It can directly control connected devices, such as door locks, by triggering actions based on user input or authorization. You can configure the relay switch(es) and DTMF for the door access on the web **Intercom > Relay** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-P557X5C8.png) - **Relay Delay(Sec)**: Set the delay time before the relay triggers. For example, if set to 5 seconds, the relay activates 5 seconds after pressing the Unlock button. - **DTMF Option**: Set the digits of the DTMF code. - **DTMF**: Define the 1-digit DTMF code within the range(0-9 and *,#) when the DTMF Mode is set to 1-digit. - **Multiple DTMF**: Set the DTMF code based on the number of digits selected in the DTMF Mode. - **Relay Status**: Indicate the states of the relay, which are normally opened and closed. By default, it shows low for normally closed(NC) and high for Normally Open(NO). > [!NOTE] > Note > > External devices connected to the relay require separate power adapter. ## Web Relay A web relay has a built-in web server and can be controlled via the Internet or a local network. The device can use a web relay to either control a local relay, or a remote relay somewhere else on the network. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1702022071712.png) Click [here](https://knowledge.akuvox.com/docs/configure-web-relay-on-door-phone-web-interface) to view how to set up web relay. To set it up, navigate to **Device > Web Relay** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-BHJ6EEB3.png) - **Type**: Determine the type of relay activated when employing door access methods for entry. - **Disabled**: Only activate the local relay. - **Web Relay**: Only activate the web relay. - **Both**: Activate both the local relay and web relay. Typically, the local relay is triggered first, followed by the web relay to execute their pre-configured actions. - **IP Address**: The web relay IP address provided by the web relay manufacturer. - **Username**: The user name provided by the web relay manufacturer. - **Password**: The manufacturer-provided authentication key for the web relay. Authentication occurs via HTTP. Leaving the Password field blank indicates non-use of HTTP authentication. You can define the password using HTTP GET in the Web Relay Action field. - **Web Relay Action**: Configure the actions to be performed by the web relay upon triggering. Enter the manufacturer-provided URLs for various actions, with up to 50 commands. > [!NOTE] > NOTE > > If the URL includes full HTTP content (e.g., http://admin:admin@192.168.1.2/state.xml?relayState=2), it doesn't rely on the IP address that you entered above. However, if the URL is simpler (e.g., state.xml?relayState=2), the relay uses the entered IP address. - **Web Relay Key**: Determine the methods to activate the web relay based on whether the DTMF code is filled. - Filling with the configured DTMF code restricts activation to card swiping and DTMF. - Leaving it blank enables all door-opening methods. - **Web Relay Extension**: Specify the intercom device and the methods it can use to activate the web relay during calls. - When an intercom device’s IP/SIP is specified, only that device can trigger the web relay (except for via card swiping or DTMF) during calls. - If left blank, all devices can trigger the relay during calls.