---
title: "Reset Access Control Terminals through Physical Buttons"
slug: "reset-access-control-terminals-through-physical-buttons"
updated: 2025-12-23T10:11:32Z
published: 2025-12-23T10:11:32Z
canonical: "knowledge.akuvox.com/reset-access-control-terminals-through-physical-buttons"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Reset Access Control Terminals through Physical Buttons

> [!NOTE]
> Note
> 
> - Power up the devices before resetting them through the physical buttons.
> - The reset button does not work when devices are in engineering mode.
> - A05 does not support reset through physical buttons.

## A01 ~ 03 and A08

- **A01 ~ 03**: Hold the reset button on the back of the device for about 15 seconds. The blue indicator light will turn on for a second. Then, the device will go into a factory reset and reboot.
- **A08**: Hold the reset button on the back of the device for more than 10 seconds until the device shines the blue indicator light. Then, it will go into a factory reset and reboot.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1744683342460.png)

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1744683304231.png)

## A095

Hold the reset button for about 15 seconds until the RUN indicator light stops flashing. Then, the device will automatically reset and restart.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-D9Y0SF8N.png)

## EC33 Elevator Controller

Press the SW1 button, and the device will reset and reboot.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-VA340IV6.png)