Use security modes to easily manage and protect your home. The system includes three default modes and allows you to create custom ones to fit your needs.
NOTE:
Before version 42.1.38.93, the security function is not supported when the HyPanel Elite 7 is used locally as a Home Center.
Make sure to configure or create security modes in the BelaHome app or the User Web Portal before arming the system.
Arm your system
You can arm your system by activating security modes.
TIP:
You can activate one default mode along with multiple custom modes at the same time. However, two default modes cannot be active simultaneously.
Quick arm
To arm the system quickly: Tap the desired mode on the Home screen, then enter the arming code (default: 000000).

Step-by-step arming
Tap the Arming card on the Home screen.
Enter the arming/disarming code. The default is 000000.
Select the mode you want to activate.
Enter the arming/disarming code again.
Wait for the countdown to finish, or tap Skip to arm immediately.

Once armed, the active security mode will be highlighted.

TIP:
If any associated sensor is detected as abnormal during arming, a prompt will appear.
To continue without that sensor, tap Ignore. The bypassed device will not trigger alarms even if it detects activity.

Disarm your system
To disarm your system, tap the highlighted mode image again, and enter the disarm code which is 000000 by default. You’ll know the system is disarmed when the mode image turns back to be dim.
Deal with an alert push
When your system is armed in a security mode and any included sensor triggered(except the bypassed ones), the system will sound an alarm and send a notification to the panel and BelaHome app.

To stop the alarm once you make sure your home and family are safe, tap Disarm and then enter the preset code (By default is 000000). Your system is still armed in the security mode after the alarm is dealt with.
Disable siren and alerts
By default, your device emits a siren and sends a push notification when any sensor is triggered while in the armed mode. You can silence the siren and disable push alerts from all the panels.
Tap the Arming card on the Home screen.
Enter the arming/disarming code. The default is 000000.
Tap
at the upper right.

To enable the siren, tap
again.
Modify and reset arming/disarming code
Change arming/disarming code
Tap the Arming card on the Home screen.
Enter the arming/disarming code. The default is 000000.
Tap
.

Enter the current arming/disarming code.
Enter the new code twice.

Forgot arming/disarming code
To restore the default password, 000000, tap Forgot Password on the password required screen and follow the onscreen instructions. Two resetting options are provided based on your cloud connection status.

Via reset email
If you’ve registered the administrator account and ensure that the devices are connected to the Internet, a code reset email will be sent to the family’s administrator email address once you tap Forgot Password. Follow the instructions included to restore the default password.
On the user web portal
Visit the user web portal, and click Settings > Change Security Code.