--- title: "Screen Display" slug: "screen-display-2" updated: 2026-10-10T02:33:28Z published: 2026-10-10T02:33:28Z canonical: "knowledge.akuvox.com/screen-display-2" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Screen Display ## On the Device You can configure a variety of features of the screen display in terms of brightness, screen saver and font size, etc. Set up the screen display on the **Settings > Display** screen. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2025-12-22T103547.757.bmp) - **Brightness**: Select the brightness value. The default is 5. The higher the value, the brighter the screen. - **Screen Saver**: Determine whether to display the screensaver when the device goes into sleep mode. - **Screen Saver Time**: The time for displaying the screensaver. - **Screen Saver Type**: - **SDMC Pictures:** Display pictures uploaded to the SDMC. - **Local Pictures:** Display pictures uploaded to the indoor monitor as the screen saver. - **Sleep Time**: Set the sleep timing based on the screen saver (15 seconds to 30 minutes). - If the screen saver is enabled, the sleep time here is the screen saver start time. For example, if you set it to 1 minute, the screen saver will start automatically when the device has no operation for 1 minute. - If the screen saver is disabled, the sleep time here is the screen turn-off time. For example, if you set it to 1 minute, the screen will be turned off automatically when the device has no operation for 1 minute. ## On the Web Interface You can upload screen saver pictures on the **Device > Display Settings > Screen Saver Settings** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-79RAQDB9.png) - **Screen Saver Pictures**: Max Size:256K; Format: 480x272 jpg; File name can only contain digits, letters, and “_”. > [!NOTE] > Note > > Previous pictures with the same ID will be overwritten if they are designated again. You can set the screen brightness and sleep time on the **Device > Display Settings> Display Settings** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-HGNGII8F.png) - **Brightness**: Select the brightness value. The default is 5. The higher the value, the brighter the screen. - **Sleep Time**: If the screen saver is enabled, the sleep time is the screen saver's start time. For example, if you set it to 1 minute, the screen saver will start automatically when the device has no operation for 1 minute. If the screen saver is disabled, the screen will be turned off automatically when the device has not been used for 1 minute. ### Upload Device Booting Image You can upload the booting image to be displayed during the device’s booting process. Navigate to **Device > Display Settings> Boot Logo** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-JIS192HH.png) - **Boot Logo**: Max size:100K; Format:480×272 jpg; File name can only contain digits, letters, and “_”. ## Home Screen Tab Display Akuvox indoor monitor allows you to customize icon display on the home screen for the convenience of users' operation. To set it up, navigate to **Device > Display Settings** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-20IERKFB.png) - **Type**: Select the functional icon to be displayed on the home screen. - **All Call/All Call 1-3**: Tap to initiate [multicast calls](https://knowledge.akuvox.com/docs/call-setting-13#multicast). When **All Call** is selected, and more than one multicast group is configured, users can choose the desired group after tapping All Call. All Call 1-3 correspond to the multicast groups 1 to 3. - **Label**: Name the icon. The DND icon cannot be renamed. - **Type**: Click to upload the icon picture. The maximum icon size is 50×50. The picture format can be JPG, JPEG, or PNG. You can click **Example** to see the icon layout. ## Unlock Tab Configuration You can customize the unlock tab and select the relay type on the talking, monitor, and call preview screen for the door opening. To set up the unlock tab on the talking screen, go to **Device > Relay > SoftKey In Talking Page** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-57B5O5HR.png) - **Status**: With it enabled, the unlock tab will be displayed on the talking screen. - **Display Name**: Name the unlock tab. - **Type**: Select the relay trigger type according to the actual setup. Scroll down to set up the unlock tab on the **Call Preview** screen. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-JU5VGRIY.png) - **Status**: With it enabled, the unlock tab will be displayed on the call-preview screen. - **Display Name**: Name the unlock tab. - **Type**: Select the relay trigger type according to the actual setup. Scroll down to set up unlock tabs on the **Monitor** screen. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-SXOS0NXT.png) - **Status**: With it enabled, the unlock tab will be displayed on the monitoring screen. - **Display Name**: Name the unlock tab. - **Type**: Select the relay trigger type according to the actual setup. Scroll down to set up the unlock button ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-QPWM0L37.png). ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-BJ6ML7K5.png) - **Status**: It is enabled by default. - **Type**: Select the relay trigger type according to the actual setup. > [!NOTE] > Note > > - Please refer to the [Access Control Configuration](https://knowledge.akuvox.com/docs/access-control-configuration-3) chapter for different unlock type setups. > - In **Softkey In Talking Page**, **Softkey In Monitor Page**, and **Softkey In Call-Preview Page**, when an **Unlock** button is configured with a Web Relay-related type, the command handling differs depending on the selected type: > - **Web Relay Action 1–10**: The indoor monitor sends the corresponding Web Relay command directly without verifying the remote device's IP address or SIP information. > - **Web Relay Action**: The indoor monitor verifies the remote device's **IP address and SIP information** before sending the corresponding command. In this case, the **IP/SIP** configured in **Web Relay Action Settings** refers to the door phone and is used for verification. ## Background Color Setting You can set the background color of the status bar and function area on the **Device > Display Setting** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-SGQ6VOGQ.png) - **Background Color**: - **Default**: Uses the default background and status bar colors. This is the default option. - **Status Bar**: Sets the color of the status bar. When selected, the **Custom Color** field is displayed below. - **Function Area**: Sets the background color of the area outside the status bar. When selected, the **Custom Color** field is displayed below. - **Custom Color**: A custom color for the selected area. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1788747036529.png)