---
title: "Screen Display"
slug: "screen-display-3-1"
updated: 2026-04-09T02:22:37Z
published: 2026-04-09T02:30:20Z
canonical: "knowledge.akuvox.com/screen-display-3-1"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Screen Display

You can configure the screen brightness, screensaver, screen lock, etc.

Go to the **More > Settings > Display** screen.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2026-04-08T114447.295.bmp)

- **Brightness**: Move the bar to adjust the screen brightness. The default brightness is 5.
- **Sleep Time**: Configurable from 15 seconds to 30 minutes, determined by the screen saver setting.
  - When the screen saver is enabled, this value defines the delay before the screen saver activates. For example, setting it to 1 minute will start the screen saver after 1 minute of inactivity.
  - When the screen saver is disabled, this value sets the screen-off delay. For example, setting it to 1 minute will turn off the screen automatically after 1 minute of inactivity.
- **Screen Saver Time**: Set the screen saver duration from 15 seconds up to 2 hours. The device will enter the screen saver mode when no one approaches or operates for the **Sleep Time**.
- **Screen Saver**: Determine whether to display the screen saver when the device goes into sleep mode.
- **Screen Saver Type**:
  - **Local Pictures:** Display pictures uploaded to the indoor monitor as the screen saver.
  - **Clock:** Display the clock as the screen saver.
- **Screen Lock**: Lock the screen after the screen is turned off(turn dark). You can tap ✔ to unlock the screen.
- **Screen Clean**: Start it to wipe the screen clean without triggering unwanted changes in the settings.
- **Wallpaper**: It is for local wallpaper selection.