---
title: "Screen Display"
slug: "screen-display-3"
updated: 2025-12-30T09:51:53Z
published: 2025-12-30T09:51:53Z
canonical: "knowledge.akuvox.com/screen-display-3"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Screen Display

You can configure the screen brightness, screensaver, screen lock, etc.

Go to the **Settings > Display** screen.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2025-12-10T104335.576.bmp)

- **Brightness**: Move the bar to adjust the screen brightness. The default brightness is 5.
- **Screen Saver**: Determine whether to display the screensaver when the device goes into sleep mode.
- **Sleep**: Set the sleep timing based on the screen saver (15 seconds to 30 minutes).
  - If the screen saver is enabled, the sleep time here is the screen saver start time. For example, if you set it to 1 minute, the screen saver will start automatically when the device has no operation for 1 minute.
  - If the screen saver is disabled, the sleep time here is the screen turn-off time. For example, if you set it to 1 minute, the screen will be turned off automatically when the device has no operation for 1 minute.
- **Screen Saver Time**: Set the screen saver duration time from 15 seconds up to 2 hours. The device will enter the screensaver mode when no one approaches or operates for the Sleep time.
- **Screen Saver Type**:
  - **Local Pictures:** Display pictures uploaded to the indoor monitor as the screen saver.
  - **Clock:** Display the clock as the screen saver.
- **Screen Lock**: Lock the screen after the screen is turned off(turn dark). You can tap ✔ to unlock the screen.