--- title: "Screen Display Configuration" slug: "screen-display-configuration-15" updated: 2025-12-10T03:52:32Z published: 2025-12-10T03:52:32Z canonical: "knowledge.akuvox.com/screen-display-configuration-15" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Screen Display Configuration ## Configure Screensaver You can conduct the await screen configuration on the web interface, where you can set the screen saver duration as well as the timing for the screen to be turned off for both screen protection and power reduction. To set it up, go to **Device > LCD > Standby Interface Display** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-YT42PY21.png) - **Screensaver Mode**: Turn on or off the screensaver. - **Screensaver Time (Sec)**: Set the screen saver duration time from 5 seconds up to 2 hours. The device will enter the screensaver mode when no one approaches or operates for the Sleep time. - **Sleep**: Set the time for the device screen to turn off or go into the screensaver mode when no one approaches or operates on the device. - **Wake Up Detection Accuracy**: Set the accuracy to wake up the screen. The higher the value is, the greater the sensitivity. ## Upload Screensaver You can upload screen-saver images to the device via the web interface, enhancing the visual experience or serving publicity purposes. To set it up, go to **Device > LCD > Upload Screensaver** interface. Click **Import** to upload the file and click **Delete** to remove the existing one. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-PZGLGPRY.png) > [!NOTE] > Note > > - The pictures uploaded should be in **JPG** or **PNG** format with 2M pixels maximum. > - Recommended resolution: 720x1280. > - If the uploaded image duplicates an existing image ID, the existing image will be overwritten. ## Screen Display Mode You can select the Default or QR Code display mode for facial recognition and QR code scanning, respectively. To set it up, go to **Device > LCD > Theme** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-6UREYZI5.png) - **QR Code Recognition Interval(Sec)**: Set the recognition interval between QR code scans when the QR Code mode is selected. ## Screen Display Style You can enable or disable the gradient mask on the device screen for the desired screen display style. Set it up on the **Device > LCD > UI** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-YHPCRFOS.png) ## Open Door Text Prompt You can enable the open door text prompt for both door-opening success and failure. To set it up, go to **Access Control > Relay > Door Setting General** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-040H0XHM.png) - **Open Door Succeeded Text Prompt**: Display a text prompt after the door is opened. - **Open Door Failed Text Prompt**: Display a text prompt after opening the door fails. - **Close Door Text Prompt Enable**: The door-closing text prompt works for the relay(s) set to the [Bistable mode](https://knowledge.akuvox.com/docs/relay-setting-18). When users close the door with their credentials, the prompt will be displayed on the device’s screen. - **Display User Info**: Display the user information after facial recognition. If facial recognition succeeds, the text prompt “Access Granted” with the user ID and name will pop up on the device screen. If it fails, the text prompt “Access Denied” with “Stranger, Name: Unknown” will be displayed.