Use security modes to easily manage and protect your home. The system includes three default modes and allows you to create custom ones to fit your needs.
Make sure to configure or create modes before arming the system.
NOTE:
By default, the Arming feature is not displayed on the Functions screen. To access this feature, please go to the user web interface, find the desired panel, and click
> Device permissions > Security > Arm/Disarm.
To arm your system, you must firstly configure three default security modes, or create custom modes on either the user web portal or BelaHome app.
Arm your system
To arm your system after you configure the security modes, do as the following:
Swipe down from the top edge of any screen to open Control Center, and tap
> Arming.Tap the desired mode, and enter the arming code (By default is 000000).
Wait for the arming count down to the end. Or tap Skip to arm your system right away.
TIP:
The arming delay time can be modified on the user web portal or BelaHome app.
Once the system is armed, the selected security mode icon is highlighted.
During the arming process, if any associated sensor is detected as abnormal, a prompt will appear.
To identify the malfunctioning sensor, tap Detail.
To proceed with the arming process despite the issue, simply tap Ignore. In this case, even if the bypassed device detects an abnormality, it will not send any alarms.
Disarm your system
To disarm your system, tap the highlighted mode image again, and enter the disarm code which is 000000 by default. You’ll know the system is disarmed when the mode image turns back to be dim.
Deal with an alert push
When your system is armed in a security mode and any included sensor triggered(except the bypassed ones), the system will sound an alarm and send a notification to the panel and BelaHome app.
To stop the alarm once you make sure your home and family are safe, tap Disarm and then enter the preset code (By default is 000000). Your system is still armed in the security mode after the alarm is dealt with.
Disable siren and alerts
By default, your device emits a siren and sends a push notification when any sensor is triggered while in the armed mode. You can silence the siren and disable push alerts from the panel.
NOTE:
Even when silenced, alerts and notifications will still be sent to guard phones and the BelaHome app.
Swipe down from the top edge of any screen to open Control Center, and tap
> Arming.Tap the bell icon
at the left corner of the scene card. Enter the code which by default is 000000.
The siren feature is disabled when you see the icon turns to
. Please note that in this case, all panels will not activate a siren and send push alarms.
To enable the siren, tap 
, and enter the preset code. The icon turns to be 
indicating that the siren function is on.
Forgot arming/disarming code
To restore the default password, 000000, tap Forgot Password on the password required screen and follow the onscreen instructions. Two resetting options are provided based on your cloud connection status.
Via reset email
If you’ve registered the administrator account and ensured that the devices are connected to the Internet, a code reset email will be sent to the family’s administrator email address once you tap Forgot Password. Follow the instructions included to restore the default password.
On the user web portal
Visit the user web portal, and click Settings > Change Security Code.
