--- title: "Set up Break-in Intrusion Alert" slug: "set-up-break-in-intrusion-alert" status: "update" updated: 2026-11-13T03:28:50Z published: 2026-11-13T03:28:50Z canonical: "knowledge.akuvox.com/set-up-break-in-intrusion-alert" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Set up Break-in Intrusion Alert The break-in intrusion feature makes door phones or access control terminals sound an alert when the door is forced open. > [!NOTE] > Note > > - Make sure you have configured the input before enabling the break-in intrusion. > - How to define the door is forced open? > - **Normal door opening**: The relay is triggered before the input is triggered, and the door is opened. > - **Abnormal door opening**: The input is triggered, and the door is opened before the relay is triggered. > > Compatible models and versions(or higher): > > S539, S538, S535, S532, X916, X915 V1/V2, X910, R29, A01/02/3, A08, A13, A15, A095, and WR01. > > - A094: 92.30.10.130 > - E18: 18.30.10.236 > - E16V2: 216.30.10.208 > - E16V3: 416.30.11.206 > - E12V2: 312.30.10.237 > - R28V2: 228.30.10.218 > - X912: 912.30.11.107 > - X912V2: 2912.30.12.110 > - R25: 25.30.10.117 > - R20V5: 320.30.11.30 > - A05V2: 205.30.11.114 > - E21: 321.30.10.106 This article takes R29 as an example. ## On the Device’s Web Interface 1. Use the device IP to log in to its web interface. The initial username and password are both admin. 2. Navigate to the **Access Control > Input** interface. 3. Enable the **Break-in Intrusion**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-DZ8A1QPF.png) 1. Click **Submit** to save the settings. When the door is forced open, an alarm will be triggered. If you want to disarm the alarm, disable break-in intrusion on the web interface, or enter the disarm code. The disarm code can be configured on the **System > Security > Disarm Setting** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-PXNGDS6U.png) > [!NOTE] > Note > > ONLY S539, S538, R29, S535, S532, X916, X915, A13S, and A15 support disarming via PIN. ### A095 Break-in Intrusion Setup A095 has 12 inputs, 8 of which can be connected to door sensors and trigger break-in intrusion alerts. - If DPS(Door Position Switch) is used, enable it on the **Access Control > Door** interface. - If AUX IN(Auxiliary Input) is used, enable it on the **Access Control > Auxiliary Input** interface. Then, bind the input to the door. 1. Go to **Access Control > Door**. 2. Select the used input from the dropdown list. 3. Enable **Break-in intrusion**. 4. Choose the **Break-in Intrusion Trigger Door**. AUX OUT 1 - 4 correspond to the 4 auxiliary outputs that can be connected to an external siren. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-4NL2CS7V.png) 1. Click Submit. > [!WARNING] > Tip > > Click [here](/v1/docs/configure-a095-disarm-settings) to view how to disarm A095. ## On the Smart Access Cloud If the device is deployed on the cloud, you can set up the break-in alarm feature on the cloud. Both installers and project managers can set up this feature for devices in new commercial projects(created after Oct.15, 2024). > [!NOTE] > Compatible models and versions(or higher): > > | Model | Version | Model | Version | > | --- | --- | --- | --- | > | R29 | 29.30.10.404 | R28 V2 | 228.30.10.231 | > | R25 | 25.30.10.117 | R20 V5 | 320.30.11.30 | > | X915 V2 | 2915.30.10.420 | X912 | 912.30.11.107 | > | X910 | 2910.30.11.28 | X912 V2 | 2912.30.12.110 | > | A08 | 108.30.11.8 | E16 V2 | 216.30.10.208 | > | A03 | 103.30.10.204 | A01/A02 | 101.30.10.206 | > | A095 | 95.30.10.110 | A094 | 92.30.10.205 | > | S539 | 539.30.10.507 | E12 V2 | 312.30.11.18 | > | S535 | 535.30.11.8 | X916 | 916.30.10.508 | > | A05 V2 | 205.30.11.114 | S538 | 538.30.10.705 | > | S532 | 532.30.10.336 | E16 V3 | 416.30.11.206 | > | A15 | 1115.30.10.407 | E18 | 18.30.11.136 | > | E21 | 321.30.10.106 | WR01 | 1401.30.11.221 | > | A13 | 1113.30.11.118 | | | Take an installer account as an example. 1. Log in to the cloud system with your account. 2. Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-7EAZZUGD.png) of the target commercial project. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-PERP3YV2.png) 1. Click **Devices** on the left column. 2. Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9TP2VMU3.png) of the target device. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-QVH0ME4D.png) 1. Select **Door** and find the **Door Status** part. 2. Select the input that is connected to the door sensor. 3. Enable the break-in alarm feature. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-L1MU5VTD.png) 1. Click Submit.