---
title: "Set up the On-Premise Relay Schedule"
slug: "set-up-the-on-premise-relay-schedule"
status: "update"
updated: 2026-08-06T07:39:35Z
published: 2026-08-06T07:39:35Z
canonical: "knowledge.akuvox.com/set-up-the-on-premise-relay-schedule"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Set up the On-Premise Relay Schedule

Akuvox enhances the on-premise relay schedule types. Support changing doors to more preset states at specific times.

## Compatible Model and Minimum Version

| Model | Version | Model | Version |
| --- | --- | --- | --- |
| A08 | 108.30.11.110 | A01/A02 | 101.30.11.12 |
| A03 | 103.30.11.6 | A095 | 95.30.10.203 |
| A094 | 92.30.11.8 | X912 | 912.30.12.22 |
| X915 V2 | 2915.30.10.619 | X916 | 916.30.10.508 |
| R29 | 29.30.10.507 | R28 V2 | 228.30.11.6 |
| R20 | 320.30.11.206 | E16 V2 | 216.30.11.107 |
| S539 | 539.30.10.507 | S535 | 535.30.11.8 |
| S538 | 538.30.10.705 | R25 | 25.30.10.206 |
| X910 | 2910.30.11.104 | A05V2 | 205.30.11.114 |
| E16 V3 | 416.30.11.206 |  |  |

## What You Should Know

Akuvox devices support 2 repeat modes and 3 schedule modes:

**Repeat Mode**

- **Routine Schedule**: The schedule repeats every week.
- **One-Time Runs**: Set the daily or weekly schedule that repeats during a defined period.

**Schedule Mode**

- **Hold Open**: The door remains open during the scheduled time.
- **First Credential In**: The door remains open during the scheduled time after users use their credentials for the first time.
- **Lockdown**: The door remains closed during the scheduled time.

## Set the Door to Hold Open

1. Use the device IP to log in to its web interface. The initial username and password are **admin**.
2. Click **Access Control > Relay**.
3. Find the **Relay Schedule** section. Specify the relay to be configured.
4. Select **Routine Schedule** or **One-Time Runs**. If the latter is selected, specify the time.
5. Click **Edit** on the right.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-3QQ1W3H7.png)

1. Select the **Hold Open** schedule mode that will be highlighted.
2. Hold and drag your mouse cursor to select a time block.
3. Set up the time block by clicking it.

You can:

- Change the type.
- Select the start time and end time.
- Check **All Day**.
- Check **Allow Manual Termination**. This allows users to use their credentials to close the door.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-GJL00XB1.png)

1. Save the setting and submit the schedule.

The door automatically opens and remains open during the scheduled time.

With **Allow Manual Termination** enabled, when users use their credentials, the door will be closed.

## Set up First Credential In

Enable this feature for specific users and set up the schedule.

### Set up a User

1. Click **Directory > User**.
2. Click **Add** to add a new user; click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-C1RAYLSM.png) to modify a current one.
3. Scroll down to the **Access Setting** section.
4. Check the relay to open via the First Credential In method.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-34P257QY.png)

1. Submit the setting.

### Set up the Schedule

1. Click **Access Control > Relay.**
2. Find the **Relay Schedule** section. Specify the relay to be configured.
3. Select **Routine Schedule** or **One-Time Runs**. If the latter is selected, specify the time.
4. Click **Edit** on the right.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-3QQ1W3H7.png)

1. Select the **First Credential In** schedule mode that will be highlighted.
2. Hold and drag your mouse cursor to select a time block.
3. Set up the time block by clicking it.

You can:

- Change the type.
- Select the start time and end time.
- Check **All Day**.
- Check **Allow Manual Termination**. This allows users to use their credentials again to close the door.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-UWMH2MU5.png)

1. Save and submit the schedule.

When users use their credentials to open the door, the door remains open during the scheduled time.

With **Allow Manual Termination** enabled, when users use their credentials again, the door will be closed.

## Set up Lockdown

During the lockdown period, users cannot open doors, except for those with lockdown bypass permission.

### **Set up the Schedule**

1. Click **Access Control > Relay.**
2. Find the **Relay Schedule** section. Specify the relay to be configured.
3. Select **Routine Schedule** or **One-Time Runs**. If the latter is selected, specify the time.
4. Click **Edit** on the right.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-3QQ1W3H7.png)

1. Select the **Lockdown** schedule mode that will be highlighted.
2. Hold and drag your mouse cursor to select a time block.
3. Set up the time block by clicking it.

You can:

- Change the type.
- Select the start time and end time.
- Check **All Day**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-JYMH71WV.png)

1. Save and submit the schedule.

### Enable Lockdown Bypass

You can enable the lockdown bypass permission for specific users.

1. Click **Directory > User**.
2. Click **Add** to add a new user; click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-C1RAYLSM.png) to modify a current one.
3. Scroll down to the **Access Setting** section.
4. Check **Lockdown Bypass**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9Y8Z653X.png)

1. Submit the setting.

The door remains locked during the scheduled time, and users cannot open the door with their credentials.

With **Lockdown Bypass** enabled, users can open the door.