---
title: "Set Up Virtual Three-Level Dimming"
slug: "set-up-virtual-three-level-dimming"
updated: 2025-09-25T06:25:00Z
published: 2025-09-25T06:25:00Z
canonical: "knowledge.akuvox.com/set-up-virtual-three-level-dimming"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Set Up Virtual Three-Level Dimming

The virtual three-level dimming group lets users control non-dimmable (on/off) lights as if they were dimmable. Lights can be assigned to three levels—low, medium, and high—for unified control and staged brightness effects.

## What You Should Know

1. Supported devices and firmware:

| **Supported Device** | **Required Firmware** |
| --- | --- |
| HyPanel Pro (PG71) | 71.1.39.44 and later |
| HyPanel Ultra (PH81) | 281.1.39.29 and later |
| HyPanel Supreme (PHX1) | 1001.1.39.27 and later |
| HyPanel (PS51) | 51.1.39.23 and later |
| HyPanel V2 (PS51(V2)) | 251.1.39.7 and later |
| HyPanel Plus (PS52) | 52.1.39.11 and later |
| HyPanel KeyPlus (KS53) | 53.1.39.10 and later |

1. Supported devices for grouping: Grouping is supported only for lights and relay switches (used to connect traditional lights).

## Configuration

1. Open a browser, enter the Home Center device’s IP address, and log in using the default credentials (admin/admin).

> [!WARNING]
> **TIP:**
> 
> See [Check IP Address of akubela Panels](https://knowledge.akuvox.com/docs/check-ip-address-of-akubela-panels) and [Log into Device Web Portal](https://knowledge.akuvox.com/docs/log-into-device-web-portal) for detailed instructions.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/67.-set-up-virtual-three-level-dimming1-image-qmmwcyjc.png)

1. Click **Dimming Group > Add**.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1758781146430.png)

1. Configure the following settings, then click **Confirm**.

- Name the group.
- Select the space where the group will be used.
- Assign lights or switches (physically connected to lights) to each level. The number of lights gradually increases from low to high.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1758781205523.png)

After setup, a virtual dimming device with three-level control is created. The group card will appear in both the device web portal (Devices screen) and the HyPanel devices.

- Device web Portal

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/67.-set-up-virtual-three-level-dimming1-image-0qimbm96.png)

- HyPanel Devices

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/67.-set-up-virtual-three-level-dimming1-image-19g93nl3.png) ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/67.-set-up-virtual-three-level-dimming1-image-5sgth8v4.png)

![_data_code_DOWNLOAD_screen (13)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/67.-set-up-virtual-three-level-dimming1-image-zd1szf0h.png)