---
title: "Sound and Volume"
slug: "sound-and-volume-3-1"
updated: 2026-04-09T02:22:01Z
published: 2026-04-09T02:30:20Z
canonical: "knowledge.akuvox.com/sound-and-volume-3-1"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Sound and Volume

Set up the volumes on the **More > Settings > Sound** screen.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2026-04-08T114029.400.bmp)

- **Ring Volume**: The incoming call ringtone volume.
- **Talk Volume**: The speaker volume during the call.
- **MIC Volume**: The microphone volume.
- **Touch Sound**: The icon tapping sound.
- **Ringtone**: The ringtone for incoming calls.
- **Notification Sound**: The ringtone for incoming messages.
- **Door Phone Ringtone**: The tone sounds when the indoor monitor receives calls from a door phone.

You can configure the doorbell sound and select the local relay to be triggered along with the doorbell on the **More >** **Settings > Doorbell** screen.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2026-04-08T114322.210.bmp)

- **Zone:** Select the zone (IO port) used for the doorbell connection.
- **Ringtones**: Select the doorbell sound.
- **Bell Duration**: Set the doorbell duration(from 10 seconds to 5 minutes).
- **Bell In Camera**: Select the camera to be triggered along with the doorbell.
- **Relay**: Select the local relay to be triggered along with the doorbell.