Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface.
Volume Configuration
On the Device
Set up the volumes on the device Settings > Sound screen.
.png "sound(1).png")
Ring Volume: The incoming call ringtone volume.
Call Volume: The speaker volume during the call.
Mic Volume: The mic volume.
Media Volume: The volume for the video screen saver.
Touch Sound: The icon tapping sound.
Phone Ringtone: The ringtone for incoming calls.
Notification Sound: The ringtone for the incoming messages.
You can configure the doorbell sound and select the local relay to be triggered along with the doorbell on the Settings > Advance > Doorbell screen.
Doorbell Sound: Select the doorbell sound.
Doorbell Timeout: Set the doorbell duration(from 10 seconds to 5 minutes).
Relay: Select the local relay to be triggered along with the doorbell.
Camera: Select the camera to be triggered along with the doorbell.
On the Web Interface
You can configure volumes on the Device > Audio interface.
Upload Tones
You can customize ringtones on the Device > Audio interface. Click Import to upload the ringtone and Delete to delete the existing one.
Note
The files to be uploaded should be in WAV or MP3 format. No limitation on the file size.
Bell Setting
You can enable/disable the use of the bell input port.
To set it up, go to the Settings > Basic interface.
Bell Input: It is enabled by default. When disabled, the doorbell trigger prompt will not display on the indoor monitor.