---
title: "Sound and Volume"
slug: "sound-and-volume-configuration-5"
updated: 2025-11-26T09:59:13Z
published: 2025-11-26T09:59:13Z
canonical: "knowledge.akuvox.com/sound-and-volume-configuration-5"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Sound and Volume

Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface.

## On the Device

Set up the volumes on the device **Settings > Sound** screen. ![6.5.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/6.5%282%29.png)

- **Ring Volume**: The incoming call ringtone volume.
- **Call Volume**: The speaker volume during the call.
- **Mic Volume**: The microphone volume.
- **Media Volume**: The volume for the video screen saver.
- **Touch Sound**: The icon tapping sound.
- **Phone Ringtone**: The ringtone for incoming calls.
- **Notification Sound**: The ringtone for the incoming messages.

You can configure the doorbell sound and select the local relay to be triggered along with the doorbell on the **Settings > Advance > Doorbell** screen.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screenshots (10).png)

## On the Web Interface

You can configure volumes on the **Device > Audio** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-XGQERI41.png)

### Upload Tones

You can customize ringtones on the **Device > Audio** interface. Click **Import** to upload the ringtone and **Delete** to delete the existing one.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-VTYP8EPC.png)

> [!NOTE]
> Note
> 
> The files to be uploaded should be in WAV or MP3 format. No limitation on the file size.

## Bell Setting

You can enable/disable the use of the bell input port.

To set it up, go to the **Settings > Basic** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-4L5U71RX.png)

- **Bell Input**: It is enabled by default. When disabled, the doorbell trigger prompt will not display on the indoor monitor.