---
title: "Sound and Volume Configuration"
slug: "sound-and-volume-configuration-6"
updated: 2023-12-14T06:41:22Z
published: 2023-12-14T06:59:25Z
canonical: "knowledge.akuvox.com/sound-and-volume-configuration-6"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Sound and Volume Configuration

Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface.

## Configure Sound and Volume on the Device

To set up the volumes on the device **More > Setting > Sound** screen.

![screenshots 42.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screenshots%20%2842%29.png)

**Parameter Set-up**:

- **Ring Volume**: adjust the incoming call ringtone volume.
- **Talk Volume**: adjust the speaker volume during the call.
- **Mic Volume**: adjust the volume of your voice to be heard.
- **Tone Volume**: adjust the dial tone volume.
- **Ringtone**: select ringtone for incoming calls.
- **Touch Sound**: adjust the icon tapping sound.
- **Notification Sound**: select the ringtone for the incoming message.

## Configure Sound and Volume on the Web Interface

You can configure the volumes and tones and customize your doorbell sound and alarm ringtone by uploading the audio file to your preference on the device web.

Go to **Phone > Audio** interface.

![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87-95HGW1Q8.png)

**Parameter Set-up**:

- **Doorbell Sound**: select and upload the doorbell sound.
- **Alarm Ringtone**: select and upload the alarm ringtone.

          Note

          

- Doorbell sound files and alarm ringtone files to be uploaded must be **.WAV** or **MP3** format.

You can enable the busy tone and answer tone if needed. if the busy tone is enabled, you can hear the busy tone from the indoor monitor if the called party is busy online. Answer tone will go off as soon as your call is answered by the called party. You can go to **Phone > Call Feature > Others**.

![IT83.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/IT83.png)

You can also go to **Advance Settings** to configure the doorbell sound and to select the local relay you want to trigger along with the doorbell.

![akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-dkz8fxcx.jpg](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-dkz8fxcx%281%29.jpg)

![akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-boseojix.jpg](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-boseojix%281%29.jpg)

**Parameter Set-up:**

- **Ringtone:** select your doorbell.
- **Timeout:** set doorbell duration (from 10 sec-5 min).
- **Relay:** select the local relay you want to trigger along with the doorbell. Or you can select **none** if you don't want to trigger any relay.