--- title: "Sound and Volume" slug: "sound-and-volume-configuration-9" updated: 2025-11-26T02:45:53Z published: 2025-11-26T02:45:53Z canonical: "knowledge.akuvox.com/sound-and-volume-configuration-9" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Sound and Volume Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface. ## **On the Device** Set up the volumes on the device **Settings > Sound** screen. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen (92).bmp) - **Ring Volume**: The incoming call ringtone volume. - **Talk Volume**: The speaker volume during the call. - **Mic Volume**: The mic volume. - **Touch Sound**: The icon tapping sound. - **Phone Ringtone**: The ringtone for incoming calls. - **Notification Sound**: The ringtone for the incoming messages. - **Door Unit Ring Tones**: The tone sounds when the indoor monitor receives calls from a door phone. You can configure the doorbell sound on the **Settings > Doorbell** screen. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2025-04-21T103016.076.bmp) - **Zone**: Set which zone(IO port) is used for the doorbell connection. - **Ring Tones**: Select the doorbell sound. - **Bell In Timeout:** Set the doorbell duration(from 10 seconds to 5 minutes). - **Bell In Camera**: Select the camera to be triggered along with the doorbell. - **Relay**: Select the local relay to be triggered along with the doorbell. ## **On the Web Interface** You can configure volumes on the **Device > Audio** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-K3CC9N77.png) - **Mic Volume**: The mic volume. - **Ring Volume**: The incoming call ringtone volume. - **Talk Volume**: The speaker volume during the call. - **Touch Sound**: The icon tapping sound. ## Upload Ringtones You can customize ringtones on the **Device > Audio** interface. Click **Import** to upload the ringtone and **Delete** to delete the existing one. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-Q64RYHRV.png) - **Ringtones Sound**: The ringtone for incoming calls. - **Door Unit Ring Tones**: The ringtone for the door opening. > [!NOTE] > Note > > File Format: WAV; Max Size: 250 KB; File Name: Less than 23 characters, &'` characters are not supported; Sample Rate: 8,000 Hz; Bit Rate: 64 kbps; Channels: Mono; Audio Codec: PCMU or PCM. ## Bell Setting You can enable/disable the use of the bell input port. To set it up, go to the **Settings > Basic** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-S0TB87JA.png) - **Bell Input**: It is enabled by default. When disabled, the doorbell trigger prompt will not display on the indoor monitor.