---
title: "Sound and Volume"
slug: "sound-and-volume-configuration"
updated: 2025-11-28T02:03:22Z
published: 2025-11-28T02:03:22Z
canonical: "knowledge.akuvox.com/sound-and-volume-configuration"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Sound and Volume

Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface.

## On the Device

Set up the volumes on the device **Settings > Sound** screen. ![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87-YZRVV8U6.png)

- **Ringtone**: The ringtone for incoming calls.
- **Door Unit Ring Tones**: The tone sounds when the indoor monitor receives calls from a door phone.
- **Ring Volume**: The incoming call ringtone volume.
- **Talk Volume**: The speaker volume during the call.
- **MIC Volume**: The mic volume.
- **Touch Sounds**: The icon tapping sound.

You can configure the doorbell sound and select the local relay to be triggered along with the doorbell on the **Settings > Doorbell** screen.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen (61).bmp)

- **Zone**: Set which zone(IO port) is used for doorbell connection.
- **Ring Tones**: Select the doorbell sound.
- **Bell In Timeout:** Set the doorbell duration(from 10 seconds to 5 minutes).
- **Bell In Camera**: Select the camera to be triggered along with the doorbell.
- **Relay**: Select the local relay to be triggered along with the doorbell.

## On the Web Interface

You can configure volumes on the **Device > Audio** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-0QMY76RA.png)

- **Ring Volume**: The incoming call ringtone volume.
- **Talk Volume**: The speaker volume during the call.
- **Mic Volume**: The mic volume.
- **Touch Sound**: The icon tapping sound.

## Upload Tones

You can customize ringtones on the **Device > Audio** interface. Click **Import** to upload the ringtone and **Delete** to delete the existing one.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-SOBQYYCE.png)

> [!NOTE]
> Note
> 
> Format: WAV; Max Size: 250 KB; File Name: Less than 8 Chinese characters or 23 characters, &'` characters are not supported; Sample Rate: 8,000 Hz; Bit Rate: 64 kbps; Channels: Mono; Audio Codec: PCMU or PCM.

## Bell Setting

You can enable/disable the use of the bell input port.

To set it up, go to the **Settings > Basic** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-5NHGHXBU.png)

- **Bell Input**: It is enabled by default. When disabled, the doorbell trigger prompt will not display on the indoor monitor.