--- title: "Update, Restart, and Reset" slug: "update-restart-and-reset-1" updated: 2026-08-07T08:10:55Z published: 2026-08-07T08:10:55Z canonical: "knowledge.akuvox.com/update-restart-and-reset-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Update, Restart, and Reset ## Update the system Device update requires cloud connection. Please contact your service provider for assistance. To update the device to the latest version: 1. Swipe down from the top edge of any screen. 2. Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-MPNPNGDR.png) > **System Settings >** **Update**. 3. On the Update screen, do any of the following: - Enable **Auto Update** to automatically download and install firmware during idle time. You can also set a preferred update time period. > [!NOTE] > **NOTE:** > > Updates will occur at the scheduled time only if: > > 1. The device has been in standby mode for the past hour, and > 2. No alarms and countdowns are set within the next hour. - Disable Auto Update to download updates automatically but install them manually. If a new version is available, tap **Install.** ![_data_code_DOWNLOAD_screen - 2025-11-11T191050.434](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/update-restart-and-reset-image-dxljzr0t.png) ## Restart HyPanel Plus To restart the system, do any of the following: - Press the restart button at the bottom edge(refer to the picture) using a paperclip or needle until the display turns off. ![52](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/update-restart-and-reset-image-yubfz4he.jpg) - Swipe down from the top edge of any screen to open Control Center, and tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-WGS2FIP9.png) > **Reboot**. ## ## Clear all user data Before resetting the device, consult your service provider. To clear all user data, swipe down from the top edge of any screen, then go to ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-0WN8WEUQ.png) **> System Settings > Reset**. The device will remain connected to the network and continue to function normally. **![_data_code_DOWNLOAD_screen - 2026-02-25T141100.664](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/update-restart-and-reset-image-t7ihdud7.png)**The reset action will: - Clear call logs and records - Delete photo wall content - Remove energy consumption and notification data - Restore display, sound, Do Not Disturb, and other settings to default The following will be retained: - Home and room layout - Added sub-devices - Scene configurations - Device and account binding ## Factory reset Before performing a factory reset, consult your service provider. To perform a factory reset, swipe down from the top edge of any screen, then go to ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-S49PHY7K.png) **> System Settings > Installer Settings(default password 123456) > Restore**. ![_data_code_DOWNLOAD_screen - 2026-02-25T141505.426](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/update-restart-and-reset-image-ti5gvg4x.png) All configurations and initial settings will be erased.The device will return to the initial setup wizard as if it were newly installed.