--- title: "Update, Restart, Reset and Shutdown" slug: "urr-7" updated: 2026-08-06T10:42:09Z published: 2026-08-07T08:23:50Z canonical: "knowledge.akuvox.com/urr-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Update, Restart, Reset and Shutdown ## Update the system > [!NOTE] > **NOTE:** > > - Device update requires cloud connection. Please contact your service provider for assistance. > - Before upgrading, make sure the HyPanel Lux Vase battery level is above **80%** or that the device is **connected to a power charger**. Otherwise, Auto Update will be disabled, and firmware upgrades via the cloud or web portal will not be available. To update the device to the latest version: 1. Swipe down from the top edge of any screen. 2. Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9U9EPR95.png) > **System Settings >** **Update**. 3. On the Update screen, do any of the following: - Enable **Auto Update** to automatically download and install firmware during idle time. You can also set a preferred update time period. > [!NOTE] > **NOTE:** > > Updates will occur at the scheduled time only if: > > 1. The device has been in standby mode for the past hour, and > 2. No alarms and countdowns are set within the next hour. - Disable Auto Update to download updates automatically but install them manually. If a new version is available, tap **Install.** > [!NOTE] > **NOTE:** > > If your system already installs the latest version, the screen shows no Install button. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-6XM2KFPA.png) ## Restart the panel To restart the device’s system, Swipe down from the top edge of any screen and tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9Z9B0XJ1.png) **> Reboot.** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-C689YQWI.png) ## Restore the panel to installer settings To reset your device, do as the following. 1. Swipe down from the top edge of any screen to open Control Center. 2. Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-WCV1M5V0.png) **> System Settings > Reset**. > [!NOTE] > **NOTE:** > > The reset results depend on the device’s usage mode your service provider selected in the initial setup. > > - Choosing the Installation Code option will reset the device to the settings that your installer set up, and remove all user data and subsequently added devices. > - Selecting Local mode will initiate a reset to factory settings, and delete all user data and devices. Please consult with your service provider before resetting devices. ## Shut down the panel To shut down the panel: 1. Swipe down from the top edge of any screen. 2. Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-PFWZ1YF2.png) **> Shut Down**, then confirm. > [!NOTE] > **NOTE:** > > If no action is taken after the confirmation dialog appears, the panel will automatically shut down after 60 seconds. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-3OYCIB84.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-LUPM6YHE.png)