---
title: "[Video]Install Akuvox MR01"
slug: "video-install-akuvox-mr01"
updated: 2026-05-21T06:41:01Z
published: 2026-05-21T06:41:01Z
canonical: "knowledge.akuvox.com/video-install-akuvox-mr01"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# [Video]Install Akuvox MR01

This video introduces how to install the Akuvox fall & bed-exit detection sensor MR01. It is for demonstration purposes only. The actual installation environment and setup may vary depending on site conditions.

[YouTube video player](https://www.youtube.com/embed/lLwqT7pkaMQ?si=_LveQ-_MXPf_v2fd)

Chapters

0:00--Overview

0:27--Part 1 Unboxing

0:52--Part 2 Product Overview

1:12--Part 3 Before You Start

2:06--Part 4 Installation -- Side Mounting

6:42--Part 5 Installation -- Top Mounting

10:45--Verify Installation Angle

## Related

- [Configure MR01 Fall and Bed-Exit Detection](/configure-mr01-fall-detection-and-bed-exit-detection.md)
- [Akuvox MR01 Millimeter Wave Radar Administrator Guide](/akuvox-mr01-millimeter-wave-radar-administrator-guide.md)