Volume Configuration
You can configure the volume of the microphone, speaker, etc. Moreover, you can also set up the tamper alarm volume when unwanted removal of the device occurs.
On the Web
Set up volumes on the web Device > Audio interface.
Prompt Volume: Include door-opening prompts, instruction tones, and ringback. The default is 8.
Mic Volume: The default is 4.
Speaker Volume: The default is 8.
Keypad Volume: The icon tapping sound. The default is 4.
Tamper Alarm Volume: Set the volume when the tamper alarm is triggered. The default is 10.
Volume Control on Talking Interface: When enabled, users can adjust the call volume during the call session.
On the Device
You can set up volumes on the Setting > Basic Setting > Volume screen.
Upload Tones
You can upload the tone for different scenarios on the Device > Audio > Voice Prompt Setting interface.
Greetings: The tone is played when the device is booted.
Access Granted: The door-opening success tone.
Access Denied: The door-opening failure tone.
PIN Page: The tone is played when entering the PIN screen.
Apart+PIN: The tone is played when entering the Apartment number and PIN code for door access.
Call Page: The tone is played when entering the Call screen.
Calling: The tone is played when calling.
Directory: The tone is played when entering the Directory screen.
Close Door: The door-closing tone.
Note
File Format: wav; Size: < 200KB; Sample Rate:16000; Bit Depth:16 Bits.
Visitor-friendly Mode
This feature decides whether to give auditory or visual prompts when recognition fails.
Set it up on the Device > Audio > Visitor-friendly Mode interface.
Type: When enabled, no prompts will be given when facial recognition/QR code scanning fails for door opening.
Open Door Tone Mode
You can decide the door-opening tone mode on the Device > Audio interface.
Voice Prompt: Play the default prompt “Welcome, please come in” when the door is opened.
Sound Effect: Play the beep sound when the door is opened.