--- title: "Volume and Tone" slug: "volume-and-tone-configuration-18-1" updated: 2025-12-09T08:08:24Z published: 2025-12-09T08:08:24Z canonical: "knowledge.akuvox.com/volume-and-tone-configuration-18-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Volume and Tone Volume and tone configuration include tamper alarm and prompt volume. Besides, you can upload door-opening ringtones. To set it up, go to **Device > Audio** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-DWZJIV2Q.png) - **Tamper Alarm**: Set the volume when the tamper alarm is triggered. The default volume is 8. - **Prompt Volume**: Set the voice prompt volume. The default volume is 8. ## Upload Open Door Tone You can upload the tone for open door failure and success on the device web interface. To upload the tones, go to **Device > Audio > Open Door Tone Setting** interface. Enable the open door tone before uploading the file. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-MO9EVZFY.png) - **Close Door Tone Enabled**: The door-closing tone works for the relay(s) set to the [Bistable mode](https://knowledge.akuvox.com/docs/relay-settings-1). When users close the door with their credentials, the prompt will be played. > [!NOTE] > Note > > File Format: wav, size: < 200KB, pcm(sample rate: 16000, bits: 16, mono)/pcma/pcmu