--- title: "Volume and Tone Configuration" slug: "volume-and-tone-configuration-9" updated: 2023-11-21T07:53:18Z published: 2023-11-21T07:53:18Z canonical: "knowledge.akuvox.com/volume-and-tone-configuration-9" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Volume and Tone Configuration Volume and ringtone configurations include microphone volume, speaker volume, alarm volume, and more. In addition, you can upload door-opening tones to enrich the user's personalized experience. ## Volume Configuration You can set up the volumes on device web **Device > Audio** interface. ![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87%28182%29.png) ## IP Announcement To set up device IP number announcement, navigate to **Device > Audio > IP announcement**. ![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87%28183%29.png) **Parameter Set-up**: - **Expiration(After Reboot)(Sec)**: select IP announcement time after the device reboot. For example, if you set it as 30 seconds, then you must press the call button within 30 seconds for the IP announcement after the device is rebooted, otherwise, the IP announcement will expire. If you set it as “0” seconds, then you can press the call button any time after the reboot for the IP announcement. - **Loop Times**: set the IP announcement loop times.