---
title: "Wireless Control"
slug: "wireless-control"
status: "new"
updated: 2026-09-23T03:24:44Z
published: 2026-10-08T03:18:55Z
canonical: "knowledge.akuvox.com/wireless-control"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Wireless Control

MR03 can pair with the Akuvox EP10 remote controller, working at 433MHz or 869MHz frequency bands for emergency calling.

Set it up on the **Device > Wireless Controller** interface. Each paired controller is listed with its name, status, and card number.

Click **+Add Controller**. Then click **Start Pairing** — the MR03 begins searching for controllers with a 30-second countdown.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-JX6Z847A.png)

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-CB36BWUJ.png)

Press the button on each controller you want to add; detected controllers appear in the results list.

Click **Confirm** to add it.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-E2G82ZQQ.png)

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-ZYB9XA0X.png)

> [!NOTE]
> Note
> 
> - See the [Configure MR03 to Make Emergency Calls with EP10](/v1/docs/configure-mr03-emergency-call-using-ep10-wireless-controller) guide for details.
> - Emergency call alarms triggered by EP10 only play the alarm sound and do not control the LED light.