--- title: "Akuvox V7.5.2 Smart Access Installer Guide - Commercial Projects" slug: "akuvox-v711-smartplus-installer-guide-commercial-projects" status: "update" updated: 2026-10-22T05:43:54Z published: 2026-10-22T05:43:54Z canonical: "knowledge.akuvox.com/akuvox-v711-smartplus-installer-guide-commercial-projects" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Akuvox V7.5.2 Smart Access Installer Guide - Commercial Projects ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/Smart-Access-Guide--Installer用户指南-EN(1)(1).jpg) **Update Time: October 2026** **About This Manual** This manual is intended for installers who need to manage companies, personnel, devices, and more on the Akuvox Smart Access Cloud(**Version: 7.5.2**). This manual applies to commercial projects that are created after **October 15, 2024**. For more information, please visit [http://www.akuvox.com/](http://www.akuvox.com/) or consult Akuvox technical support. **What's New in 7.5.2**: - [Support controlling whether end users can submit requests to use Apple Wallet Pass](/v1/docs/installers-enable-apple-wallet-access-for-users). ## System Overview You can use this platform to: - Add, edit, and delete the companies, devices, administrators, and personnel. - Deploy and set up devices and doors for access control. - Check and upgrade device firmware. - Check and manage the MAC library. - Conduct remote operations such as auto-provisioning, device reboot, transmission type modification, and remote maintenance. - Subscribe and renew the cloud service. - Manage sub-installer accounts. ## Login You can log in to the cloud platform using the account obtained from your distributor. 1. Open the web browser, enter the address (URL) of the server location in your area, and press Enter. 2. Enter your username and password. 3. Click **Login**. > [!NOTE] > Note > > Enter a verification code for login if your distributor enables the two-factor authentication. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-VLAWDOZ0.png) ## Log Out Click **Log out** in the upper right corner to exit the system. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-BDPPV73I.png) ## Email Confirmation You are required to enter an email address when you log in to the cloud platform. The email address is used to reset your login password and to receive notifications from Akuvox. You can change the email address and turn off the notification push on the **Setting > Notification** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-WO54EFHI.png) > [!NOTE] > Note > > Click [here](https://portal.document360.io/v1/docs/reset-the-smartplus-platform-login-password-via-email-address) to view how to reset the login password using the email address. ## Prior to the Management It is advised that you go through what is listed below before starting your management. - Check if all device MAC addresses have already been registered by your distributor. - Check if the device firmware supports cloud mode with no connection to SDMC. - Check if the device is powered on and is connected to the internet, and make sure that the network is normal. - Check and make sure that the user information and device information are correct. ## Dashboard The functional columns allow you to manage sites, users, devices, and account settings in an organized manner. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/Screenshot 2026-08-27 161004.png) **Module Description**: | **Modules** | **Description** | | --- | --- | | Dashboard | Have quick access to create projects and project manager accounts, and a quick view of devices and SmartPlus App account status. | | Sites | Click to go into specific project management. | | Users | Add, edit, and delete property managers and sub-installer accounts. | | Firmware | Check the available firmware versions and their information. | | Upgrade | Upgrade the firmware version for a specific device. | | Message | Create messages and send them to target users. | | MAC Library | Check the device MAC registered by your distributor. You can remove the desired MAC. | | Subscriptions | This module is available when your distributor permits you to pay. It contains the following three sub-modules: - Subscriptions: Activate or renew SmartPlus service for a specific project. - Payments: Check the payment records. - Automatic Payments: Check the automatic payment record. | | Integration | Display the third-party locks. | | Setting | Check coupon details, credit logs, set up time, billing information, account settings, etc. | ## Site Management The cloud system offers two types of sites. - **Single-Company Site**: Easy and streamlined setup. Ideal for small businesses such as stores, restaurants, startups, and other simple scenarios. - **Multi-Company Site**: Support the creation of multiple companies. Designed for projects that require more complex permission isolation and configuration. ### Add a Site Add sites on the **Site** module or through the **Quicklinks** on the Dashboard. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-I2LNAX00.png) On the **Sites** module, 1. Select **Commercial** and click **+New**. 2. Choose **Single-Company Site** or **Multi-Company Site**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-KR7I636V.png) 1. Set up the project. See details in the chart below. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-05G4FJJQ.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-11HKL59J.png) | Item Name | Description | | --- | --- | | Name[Mandatory] | The site name. | | Address | The site address. Click **Get Current Location** to automatically fill in the address, which requires the browser permission. | | Time Zone | The time zone of the site. | | Application Scenario | The specific scenario. Options are different for single-company and multi-company sites. | | Personnel Privileges on SmartPlus App | Personnel’s specific permission to use their SmartPlus App. Both are disabled by default. - **Create PIN**: When checked, the user can create PINs for door opening on the app. - **Create QR Code**: When checked, the user can create temporary QR codes for door opening on the app. | | Premium Features | Premium features affect the project’s billing. They are disabled by default. - **Time Attendance Plan**: - **200-Personnel Package**: Arrange shifts for 200 personnel at a maximum. - **Unlimited Personnel Package**: Arrange shifts for an unlimited number of personnel. - **Elevator Control**: Enables integrated access control and elevator management. Click [here](/v1/docs/configure-ec33-elevator-control-on-the-smart-access-cloud) to view the feature configuration guidance. - **Event Trigger Rules**: Allows you to automate actions based on access control events. Click [here](/v1/docs/configure-event-trigger-rules-for-automated-access-control-actions) to view the feature configuration guidance. | | Allow End Users to Request Apple Wallet Pass | With this feature enabled, end users can request Apple Wallet Pass from their SmartPlus App. You can review requests, arrange payment, and activate the feature after you receive payment from end users. Click [here](/v1/docs/installers-enable-apple-wallet-access-for-users) to view the detailed configuration guide. | 1. You can add project managers and set up their permissions immediately after the site is created. Or, click **Set Later** to add PMs when editing the site. 2. Select the project manager from the list, or [create a new account](/v1/docs/akuvox-v711-smartplus-installer-guide-commercial-projects#add-project-manager-account) by clicking **+New Project Manager**. 3. Set whether the PM has permission to pay the cloud service fee for the site. This option displays when you have permission to pay. 4. Set whether to send the service expiration and renewal emails to the PM. Disabled by default. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-7BTF6CM9.png) 1. Submit the setting. ### Edit and Delete Sites 1. On the **Sites** module, click![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-6EUXRJAB.png)of the desired site. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-YTJRL06N.png) 1. Set up additional settings. See details in the chart below. 2. To delete the site, click **Delete** at the bottom. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-G94YRQD6.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-LQCYZP70.png) | Item Name | Description | | --- | --- | | Time Format | Select the desired time format. | | Date Format | Select the desired date format. | | Contact Display Order | Determine the display order of usernames on the device contact list. | | Send email when the device is disconnected | Set whether to send a notification to the PM when the device is offline. | | Send message when SIM card data exceeds the limit | Set whether to send a notification to the PM when the SIM card data of devices with LTE function exceeds a limit. | | Parking Restrictions | ONLY available for multi-company projects. It is used to define the actual number of spaces rented or purchased. - With it enabled, you can specify the parking spaces for each company. - Click [here](/v1/docs/configure-parking-restrictions-for-commercial-projects) to view the detailed configuration. | #### Check Network Requirements The project-editing page displays the domains and ports required by different cloud services for the project. Use this information to configure the firewall and network settings accordingly. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-VHIXEXST.png) ### Batch Import Devices and Personnel to Sites You can use templates to improve the efficiency of adding devices and personnel to sites. 1. Click **Download The Template** on the **Sites** module. 2. Select the template based on your project type: single-company, multi-company, or old version(created before Oct.15, 2024) projects. 3. Enter the information in the template. See input instructions by hovering your mouse cursor over specific columns. 4. Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-PICUDFBP.png) to import the template. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-WB4W5419.png) ## Project Management After creating sites, click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1X9IOSBB.png) of the specific project to manage the companies, personnel, administrators, devices, etc in the project. Please refer to the following manuals for instructions. - [Akuvox Smart Access Single-Company Management Guide](/v1/docs/akuvox-v730-smart-access-single-company-project-management-guide) - [Akuvox Smart Access Multi-Company Management Guide](/v1/docs/akuvox-smartplus-property-manager-portal-guide-office) ### Add Project Manager Account You can create a project manager account and assign it to a specific commercial project. 1. Click **Users** on the left column and click **New PM** on the right. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-EIGMIDR5.png) 1. Fill in the PM information and select the language of the email sent to the PM. 2. Enable or disable the Monthly Password Update Reminder and Email Two-Factor Authorization for Login. - **Monthly Password Update Reminder**: If enabled, when PMs log in to the cloud platform, they will see a prompt every month reminding them to change their SmartPlus login passwords. This feature is used to enhance the security of PM accounts. - **Email Two-Factor Authorization for Login**: If enabled, when PMs log in to the cloud platform, they need to enter their email addresses and fill in a verification code for login. 1. Choose the project(s) that are managed by the PM. Move them from the left to the right box. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-Z4QY7CHM.png) You can also assign PMs to projects on the **Sites** interface. 1. Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-v6.5.4-smartplus-installer-guide---community-image-52ege2uw.png) of the project. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-MKE8APCJ.png) 1. Select PMs from the dropdown menu. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-GFD95A4H.png) ### Edit/Delete Project Manager Account You can edit and delete the PM account. 1. Go to the **Users** module and select **PM**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-AQUY1K5P.png) 1. Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-3C4ON8NS.png) to edit the PM account information and reset its password. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-2UJ6JPGE.png) ### Batch Import Project Manager Accounts You can add/edit PM accounts in a batch to improve efficiency. 1. On the **Users** module, click **Import** on the right. 2. Click **Download Template**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-46J36PES.png) > [!NOTE] > Note > > - The email is a credential corresponding to the existing PM account and cannot be modified. > - For example, if you want to change the language of a certain account while keeping other items unchanged, select the target language in the file, enter the email of that account, and leave other items blank. 1. Edit the template. Enter the first name and last name of the PM. 2. Enter the email address to receive the account activation email. It is mandatory and cannot be modified for the existing PM. 3. Select the language of the email from the available options. 4. Enter the commercial project name(s) to be managed. - You can ONLY fill in one project name in one row. If the PM manages multiple projects, use separate rows. - You can ONLY enter the project(s) that have been created. - You can check the instructions by moving your mouse cursor to the columns. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-JZDYVRPN.png) 1. Click **Batch Add/Edit Project Manager** and upload the file. The importing result will then display. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-HVBYCLAQ.png) ## Firmware Management You can check and update the device firmware version in the **Firmware** module and **Upgrade** module, respectively. ### Check Firmware List Before upgrading device firmware, you can go to the **Firmware** module to check the latest available for uploading. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-v6.6.2-smartplus-installer-guide---officeupdate-image-2fcn5g5w.png) **Firmware List Description** | **Field Name** | **Description** | | --- | --- | | Version | Displays the firmware version number. | | Model | Displays the device model. | | Version Log | Generally displays remarks on the version. | | Created Time | Displays when the firmware is uploaded. | | Action | Click to check the detailed firmware information. | ### Upgrade Firmware You can upgrade the device firmware to the selected version according to the update timing defined. 1. Go to the **Upgrade** module. 2. Click **New**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-TDF977Z3.png) 1. Select Commercial as the project type and choose the site. 2. Select the firmware version and the device to be upgraded. 3. Select the time to upgrade the device. 4. You can check **Reset After Upgrade** to reset the device's configuration after upgrading finishes. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-OIYW27CL.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-14HLVU2P.png) ### Check and Edit the Firmware Upgrade List After upgrading the device firmware, you can not only check your firmware update status but also edit the update settings for devices pending the upgrade. And you can delete the specific record as well. 1. Search the firmware status by All, Pending, Processing, and Executed. 2. Edit the update set for the devices pending the update. 3. Delete the specific update record if needed. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-TDF977Z3.png) **Update List Description** | **Field Name** | **Description** | | --- | --- | | Version | Displays the firmware version number in the update list. | | Device | Displays the device model in the update list. | | Status | Displays update status: **Pending** for the firmware that will be updated according to the updating timing. **Executed** for the firmware that has finished updating, and **Processing** for the firmware that is being updated. | | Update Time | Displays when the firmware is updated. | | Created Time | Displays when the update setting is created. | | Action | Action involves the update setting alteration and the update record removal. | > [!NOTE] > Note > > After initiating the specific firmware update, refresh the window to update the firmware list. ## Sub-Installer Account Management When several people are responsible for one project, you can create and log in to different sub-installer accounts of the same main account at the same time. The data shown is the same. ### Add Sub-Installer Account 1. Click the **Users** module and click **Sub Account**. 2. Click **New Sub Account** on the right. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-HCK2466X.png) 1. Enter the account's information. The SmartPlus portal login password will be sent to the email address. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-GRPRKEL3.png) ### Edit/Delete Sub-Installer Account 1. Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-3C4ON8NS.png) to edit the sub-account information and reset the password. 2. Click![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-v6.5.4-smartplus-installer-guide---community-image-6xx3o5n8(1).png) to delete the account. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-ZDEED35G.png) ## Installer Account Management You can change the account password, time zone, and billing information. ### Change Installer Account Password 1. Click your account name in the upper right corner. 2. Click **Change Password**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-SMCZHNH2.png) 1. Change the password. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-v6.6.2-smartplus-installer-guide---officeupdate-image-h8we5x20.png) ### Change Time Settings Click **Setting > Time** to set up the time settings. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-GCZ2OJRW.png) ### Set Account Access Permission You can grant permission to your distributor to log in to your account without a password. With permission, distributors can switch to your account from their web portal to give you support or assistance. The account settings will be displayed in the drop-down list once the distributor enables the account access feature. You can turn on or off the permission whenever you need. 1. Click **Setting** and select **Account Setting**. 2. Disable/enable the permissions. > [!NOTE] > Note > > The account setting will only appear once your distributor enables the account access feature. By default, the Permission Granted feature is turned on. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-MP8RLV1O.png) ### Billing Information You are required to fill in your billing information so that your distributor will be able to send you the bill according to the information you filled in. Click **Setting > Billing Information** and enter the information. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-KB6UT55L.png) ## Log Control You can control whether to display captured images or recorded videos in call logs. Click **Setting > Log Setting** to set it up. Enable/disable **Call History Snapshots**. It is enabled by default. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-D72UWCVM.png) ## Credit Logs Akuvox supports using credit to activate and renew SmartPlus services. After your distributors assign credits to you, you can use them for payment. Check your available credits by clicking **Setting > Credit Logs**. > [!NOTE] > Note > > ONLY commercial projects created after June 1, 2025, support credit payment. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-0CXMRKH4.png) ## Customer Service Customer service allows customers to contact you through the information you entered on the SmartPlus installer portal. 1. Click **Setting** and select **Customer Service**. 2. Enter or modify your phone number and email address. 3. Enable **Receive Feedback** if needed, and end users' feedback will be sent to the email address that you fill in. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-Q9PBPU8W.png) ## Privacy Policy You will see the Privacy Policy window when you log into the platform for the first time. The Privacy Policy tells you how the user data is collected, used, and protected. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1729481204330.png) - When you click **Agree**, you will be guided to the Service Provider Information interface to fill in your information. The information will be displayed in the privacy policy for end users. It is not mandatory to fill it out. Not filling it in will not affect your use of SmartPlus cloud services. - When you click **Disagree**, you cannot log in to the SmartPlus platform. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-I39AATDE.png) ## Contact Us For more information about the product, please visit us at [www.akuvox.com](/docs/www.akuvox.com), or feel free to contact us by Sales email: [sales@akuvox.com](mailto:sales@akuvox.com) Technical support email: [support@akuvox.com](mailto:support@akuvox.com) Telephone: +86-592-2133061 ext.7694/8162 We highly appreciate your feedback about our products. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-v6.6.0-smartplus-property-manager-guide-image-k78m6doq.png)