--- title: "Before Getting Started" slug: "bgs" updated: 2026-08-10T08:29:33Z published: 2026-08-17T08:48:19Z canonical: "knowledge.akuvox.com/bgs" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Before Getting Started 1. **Project Setup Requirements:** All projects, smart home panels, and intercom devices must be added to the akubela Cloud and complete the installation process. This is required to enable GRMS features such as room check-in and card issuance. 2. **Panel Compatibility:** Ensure your smart home panels are GRMS-compatible and running the required firmware versions. | **Compatible Device** | **Required Firmware Version** | **Serve as Home Center in GRMS Project** | **Serve as Gateway in GRMS Project** | | --- | --- | --- | --- | | HyPanel | 51.1.36.417 or later | √ | √ | | HyPanel (V2) | 251.1.36.408 or later | √ | √ | | HyPanel Plus | 52.1.36.407 or later | √ | √ | | HyPanel KeyPlus | 53.1.36.412 or later | √ | √ | | HyPanel Pro | 71.1.38.431 or later | √ | √ | | HyPanel Ultra | 281.1.38.421 or later | √ | √ | | HyPanel Supreme | 1001.1.38.418 or later | √ | √ | | SmartPanel | 933.1.38.415 or later | √ | √ | | SmartPanel Elite 10 | 119.1.38.414 or later | √ | √ | 1. **QR Code (H5 Control) Requirements** To enable [QR code display on panels for H5 interface control](/v1/docs/rc#guest-mobile-h5-control), update devices to the following versions: | **Compatible Device** | **Required Firmware Version** | | --- | --- | | HyPanel | 51.1.39.127 or later | | HyPanel (V2) | 251.1.39.108 or later | | HyPanel Plus | 52.1.39.109 or later | | HyPanel KeyPlus | 53.1.39.110 or later | | HyPanel Pro | 71.1.39.126 or later | | HyPanel Ultra | 281.1.39.121 or later | | HyPanel Supreme | 1001.1.39.118 or later | | HyPanel Elite 10 | 159.1.39.146 or later | | SmartPanel | 933.1.39.103 or later | | SmartPanel Elite 10 | 119.1.39.104 or later | 1. **Additional Device Requirements** For projects using the following devices, ensure they meet the required firmware versions. | **Compatible Device** | **Required Firmware Version** | **Supported Functions** | | --- | --- | --- | | Switch Actuator (R8) | 2.0.0.2 or later | Device display and control | | IP-485 Multifunctional Gateway (R10) | 10.1.0.42 or later | Device display and control | | C6 Smart Lock | V4 or later | Device display and control, RF card issuance, PIN issuance | | F2 Smart Lock | V16 or later | Device display and control, PIN issuance |