---
title: "Composer Configuration"
slug: "composer-configuration"
updated: 2026-08-10T08:09:22Z
published: 2026-08-10T08:09:22Z
canonical: "knowledge.akuvox.com/composer-configuration"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Composer Configuration

You can watch the video or refer to the text instructions.

[YouTube video player](https://www.youtube.com/embed/9EhOXHiGCvU?si=eYWWqCrFR5KTJptR)

Video Outline:

0:00--Overview

0:27--Set up Door Phone and Indoor Monitor

2:18--Add Drivers and Connect Devices

3:30--Update Settings to Akuvox Devices

4:24--Make One-to-One SIP Calls

5:37--Make Group Calls

6:35--View Call Preview from the Door Phone

7:03--Open Doors

8:29--Configure Doorbell Button

> [!NOTE]
> Note
> 
> For S567 with the version 567.30.14.102 or higher, enable **Discovery Mode** for connection with Control4.

## Preparation

### Update Composer

> [!NOTE]
> Note
> 
> The Composer version should be consistent with the C4 controller.

When logging into the Composer for the first time, you can check its version.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-0ZNMTYSZ.png)

If you want to check the information about updates, click **Help > Check for Updates**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-II94TG4K.png)

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-DPWJ2EI9.png)

### Upgrade Devices

You need to upgrade devices to [specific firmware](https://knowledge.akuvox.com/docs/overview) for integration with Control4.

1. Log into the device’s web interface with its IP address. The default username and password are **admin**.
2. Navigate to the **System > Upgrade** interface.
3. Choose the file from the local drive and click **Upgrade**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-Q17QTPYQ.png)

> [!NOTE]
> Note
> 
> - To download firmware, go to [Firmware & Tool](https://knowledge.akuvox.com/docs/firmware-7) on Knowledge Base and choose the target category and model.
> - The routes to obtain the IP address vary by model, you may refer to [https://knowledge.akuvox.com/docs/before-entering-device-web-interface.](https://knowledge.akuvox.com/docs/before-entering-device-web-interface.)
> - Also, you can use IP scanner to scan IP address(es) of all devices within the same LAN.
>   - To download: [https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IP](https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IP)
>   - Detailed guide: [https://knowledge.akuvox.com/v1/docs/en/how-to-obtain-ip-address-via-ip-scanner?highlight=IP%20Scanner](https://knowledge.akuvox.com/v1/docs/en/how-to-obtain-ip-address-via-ip-scanner?highlight=IP%20Scanner)
> - Google Chrome browser is strongly recommended.
> - Your computer should be on the same network as the device.

### Set the Door Phone and Indoor Monitor

After upgrading devices to the versions that support C4 integration, you need to activate the integration and turn off specific switches such as discovery mode for fulfilling communication between C4 and Akuvox devices.

Please refer to the [Door Phone Configuration](https://knowledge.akuvox.com/docs/door-phone-configuration) and [Indoor Monitor Configuration](https://knowledge.akuvox.com/docs/indoor-monitor-configuration).

### Add Drivers in Composer

1. Run the Composer software.
2. Find **Driver** on the menu and click **Add or Update Driver**.
3. Select the driver from your computer and upload it.

> [!NOTE]
> Note
> 
> - You can install the C4 app in indoor monitors instead of adding drivers.
> - To acquire drivers, go to the [Driver Download](https://knowledge.akuvox.com/docs/driver-download) chapter.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-FVO00KGT.png)

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-5UH8CPMC.png)

1. Click **Discovered** on the left **Items** menu. Right-click on the discovered device and click **Add to the Project**.

If the device does not display, click **Refresh** to update the list.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1756972010423.png)

1. You can see the device with the default name **Ak-Doorstation** in the **System Design** interface.

You can right-click to rename the device for identification.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-W8VLFF0W.png)

### Connect Devices to the Composer

1. Go to **Connections > Network > IP Network Connections** interface, where you can check the device’s connection status.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1756973259077.png)

1. Click the desired device if it appears **Offline**.
2. Enter the device’s IP address and close the window.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1756973226083.png)

The device will appear online. Go back to the **System Design** interface, and the device’s information is shown.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-RCODAX2L.png)

## Features Configuration

### Update Settings to Akuvox Devices

You can change some settings on the **System Design** interface and update them to the door phone.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-B1GZ1MSN.png)

- **Web Username/Web Password**: The username and password used to access the device’s web interface.
- **Call Group**: The default is **All**(Containing the C4 panel). You can create a new group and add more contacts. For instructions, refer to the [Add Contacts to a Group](/v1/docs/composer-configuration#add-contacts-to-a-group) section.
- **Relay via HTTP**: Allow door-opening via HTTP command. Keep it on if you want to use this feature.
- **Relay Username/Password**: The credentials used in the HTTP command.

After changing the settings, click **Actions** and update the changes to the door phone.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-IU4UUMJW.png)

### Make SIP Calls

- After the connection, the Akuvox device will register a SIP account automatically.
- You can find the device with the default name **Ak-Intercom** on the C4 panel and tap to make a call.
- To initiate a call from the door phone, you can add the C4 panel as a contact to the door phone. For detailed steps, see the [Door Phone Configuration](https://knowledge.akuvox.com/docs/door-phone-configuration#features-configuration) chapter.

Check the C4 panel’s number on **System Design > Intercom** under the panel name.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-VVZXVR2W.png)

### Add Contacts to a Group

The composer creates a default group named **All**, which only contains C4 panels.

You can customize a group and add devices to it.

1. Go to **Agents > Communication** interface. Click **New** to create a new group.

If you do not find **Communication**, click **Add** to add it.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1756974388505.png)

1. Move the desired devices from the left to the right box.
2. Click **File** in the upper left corner and select **Refresh Navigators** to update the configuration to the C4 panel.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-G2J6LG78.png)

1. Then, to bind the door phone to the group, go to **System Design > [*Device Name*] > Properties** interface.
2. Find the **Call Group**, select the desired group, and click **Set**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9322Y3XZ.png)

1. Go to **Actions** and click **Update Contact**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-8ATDQTV2.png)

The group name will be displayed on the door phone’s directory list.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2025-09-04T163318.523.bmp)

E16V2

### View Live Stream from the Door Phone

To view the call preview from the door phone, you need to enable the camera.

1. Go to **System Design > AK Intercom.**
2. Check **Use Alternate Camera** and select **Ak-Camera** under the device.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-T2ETIX7H.png)

### Unlock

Through configuration, users can press the unlock button on the C4 panel to open the door.

#### Bind Door Lock and Relay

1. Search for the lock driver in **My Drivers** on the Items menu.
2. Double-click it to add it. Its default name is **Door Lock**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-VE9U07DJ.png)

1. To bind the door lock to the door phone relay, click **Connections > Control/AV** and find the door lock.

Drag and drop the relay on the desired door lock.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1756975646348.png)

#### Configure Unlock Button

1. Go to **System Design > AK Intercom** interface and enable the custom button. Customize the button name.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-BFOHD53J.png)

1. To bind the button to the door lock, go to the **Programming > [*The device name*]** interface and select **UI Button One Pressed**.
2. In **Door Lock Actions** on the right, select **Toggle the Room→[*The lock name*]**.
3. Drag and drop ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-DAEM3445.png) on **Script Actions** to achieve the binding.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1756976431397.png)

1. Click **File** in the upper left corner and select **Refresh Navigators** to update the configuration to the C4 panel.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-UOGB1ACD.png)

### Configure Input Trigger (Doorbell Button Example)

The door phone supports connecting external devices through input ports. When an input is triggered, predefined actions can be performed in Control4 Composer. This section uses a doorbell button as an example.

> [!NOTE]
> Note
> 
> - When using Input with Control4 integration, make sure the same Input is also configured in Control4 Composer.
> - If an Input is set on the door phone but not in Composer, Control4 may overwrite it with **None** during sync — causing the configured trigger (e.g., Input 1 → Relay A) to stop working over time.
> - To avoid this, always configure Input actions in Control4 Composer, not just on the door phone.

This section takes initiating the group call as an example.

1. Search “doorbell“ in **My Drivers** and double-click the option to add the button.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-2E3RX88F.png)

1. Then, you need to bind the button to the door phone’s input.

Go to **Connections > AK Intercom** interface. Drag and drop the door phone input on the desired button.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-IWEVNFMC.png)

1. Then, you need to decide the action after users press the button.

Go to the **Programming > Doorbell** interface and select **When the Doorbell is pressed**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-RVQTRO0F.png)

1. In **Actions** of Devices Actions on the right, select the desired **Intercom** feature of the door phone.
2. Enable **Group Call** and select the target group.
3. Drag and drop ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-A4SIW8HB.png) on **Script Actions**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1GJYA3HB.png)

1. Click **File** in the upper left corner and select **Refresh Navigators** to update the configuration to the C4 panel.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-UOGB1ACD.png)

After configuration, the action configured will be performed by triggering the input.

### Trigger C4 Events by Unlocking

Specific door phone models support triggering C4 events when users use their credentials to open doors.

Click [here](https://knowledge.akuvox.com/docs/door-phone-configuration#trigger-c4-events-by-unlocking) to view the supported models and configurations on the door phone.

After [setting up relays](/v1/docs/composer-configuration#unlock) in the composer, you can set up additional events.

1. Click **Programming > [*The device name*]**.
2. Select the event ID that should be the same as configured on the door phone.
3. Set the device intercom actions in the right **Device Actions** and configure the desired action.

For example, when users open the door, the door phone makes a call to the C4 panel.
4. Drag and drop the action onto **Script Actions**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1757410085192.png)

1. Click **File** in the upper left corner and select **Refresh Navigators** to update the configuration to the C4 panel.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-UOGB1ACD.png)