S567 Release Firmware (Click to download)
Version: 567.30.13.305
S567 Beta Firmware (Click to download)
Version: 567.30.114.605
Note
It is recommended to use Release and LTS version firmware.
Release Notes
Version: 567.30.114.605 (Beta)
Release Date: February 2, 2026
Supported SmartPlus Version: V7.2.0
Note
This version is based on Android 14. Devices can be upgraded from a version of Android 12, but downgrading back to an older version of Android 12 is not supported.
If the current version is earlier than 567.30.12.9XX, it cannot be upgraded directly to the version of Android 14. Please first upgrade to a version between 567.30.12.9XX and 567.30.13.3XX, and then proceed with the upgrade to the new version.
Optimizations
Optimized Bela assistant.
Restricted web browser access by disabling long-press on the contact IP address.
Improved the integration with the third-party App.
Version: 567.30.114.503 (Beta)
Release Date: January 6, 2026
Supported SmartPlus Version: V7.2.0
Note
This version is based on Android 14. Devices can be upgraded from a version of Android 12, but downgrading back to an older version of Android 12 is not supported.
If the current version is earlier than 567.30.12.9XX, it cannot be upgraded directly to the version of Android 14. Please first upgrade to a version between 567.30.12.9XX and 567.30.13.3XX, and then proceed with the upgrade to the new version.
The version and newer versions do not support the PBX feature.
New Features
Support call transfer feature.
Support disabling the camera during video calls.
Support disabling the use of specific apps.
Support selecting the temperature unit on the device’s web portal.
Support left and right swiping to view different cameras and allows displaying more than 3×3 and 5×5 camera views for the monitoring interface.
Support installing .XAPK format App.
Version: 567.30.14.102 (Beta)
Release Date: September 2, 2025
Supported SmartPlus Version: V7.2.0
New Features
Support the integration with the Yunji robot.
Optimized Call Log.
Support displaying the door-opening source on the SmartPlus App when users open doors on the device.
Version: 567.30.13.804 (Beta)
Release Date: July 4, 2025
Supported SmartPlus Version: V7.1
New Features
Support keeping the monitoring screen on.
Modified motion value of zone type to 14.
Support configuring WiFi Contrycode.
Support the integration with Hikvision NVR.
Restricted web browser access by disabling long press on the contact IP address.
Removed Bela Assistant.
Added Delete icon on the device monitor setting page.
Version: 567.30.13.703 (Beta)
Release Date: June 20, 2025
Supported SmartPlus Version: V7.1.3
Optimization
Improved the using experience.
Version: 567.30.13.702 (Beta)
Release Date: May 29, 2025
Supported SmartPlus Version: V7.1.3
New Features
Support installing the ORVIBO home app.
Support automatically switching screensaver and wallpaper for festivals.
Limited each household to 300 commands for Bela voice assistant per month.
Optimization
Improved Korean entries.
Version: 567.30.13.604 (Beta)
Release Date: April 30, 2025
Supported SmartPlus Version: V7.1
New Features
Support changing the theme style on the device screen or web portal.
Support adding and removing tabs on the device screen.
Support adding the hidden Wi-Fi.
Support asking the Bela voice assistant for time.
Support remotely opening the indoor monitor’s relay without authentication when its username and password are not set.
Version: 567.30.13.602 (Beta)
Release Date: April 21, 2025
Supported SmartPlus Version: V7.1
New Feature
Support switching between the main and auxiliary cameras for X910 monitor.
Version: 567.30.13.503 (Beta)
Release Date: March 31, 2025
Supported SmartPlus Version: V7.0
New Features
Support calling the door phone during monitoring.
Support SNMP feature.
Optimized text of Network Detection interface.
Updated time zone file.
Optimized video record feature:
Support deleting videos recorded by door phones.
Optimized pop-up message: clicking the "OK" button now closes the pop-up and immediately stops loading.
Display manual screenshot icon on Capture & Video interface.
Real-time update of video download status.
Support connecting to and controlling akubela RSAC-C1-R8 both on the device and the SmartPlus Cloud.
Added the port option for remotely accessing other intercom devices’ web settings.
Support Hebrew language for device.
Support viewing the third-party camera’s stream when it is linked to an access control terminal.
Optimized UI and text of web interface.
Fixed Bug
Fixed an issue where the device rebooted due to insufficient power supply.
Version: 567.30.13.404 (Beta)
Release Date: February 28, 2025
Supported SmartPlus Version: V7.0
New Features
Unified DTMF feature name.
Support hiding Management Center button.
Changed video recording to start from call preview until the end.
Support Bela Voice Assistant (only for English).
Optimization
Improved the speed of cloud connecting.
Version: 567.30.13.305 (Release)
Release Date: January 22, 2025
Supported SmartPlus Version: V7.0
New Features
Support setting call audio routing as Bluetooth device.
Support hiding some settings on the device, which can be configured via AutoP.
Support configuring connect mode on the web interface.
Support receiving notifications from SmartPlus cloud when triggering emergency unlock.
Support SSRC negotiation for calls.
Added SmartPlus App number as contact on the top of list.
Disabled to disarm device on the web interface when device arming mode is triggered.
Integrated with Sonos, which can scan Sonos device and play the music on the list.
Version: 567.30.13.303 (Beta)
Release Date: January 15, 2025
Supported SmartPlus Version: V7.0
New Feature
Support saving videos for door unlocks, calls, monitors, and motion detections.
Version: 567.30.13.203 (Beta)
Release Date: December 26, 2024
Supported SmartPlus Version: V7.0
New Features
Integrated with AJAX arming system, which can synchronize arm, disarm, and alarm status.
Cancelled the Label input that can not be configured.
Added Other Alarm for Alarm Log, which can display customization alarm.
Set the unlock icon on the Talking, Call Preview, and Monitor pages to Auto by default. For local devices, this corresponds to the first relay, while for on-cloud devices, it follows the cloud-configured settings.
Support adding Unlock button on the home and more page, which can configure as HTTP1 to HTTP10.
Added Network Detection feature to improve troubleshooting.
Support receiving Voice Message from cloud.
Added a permission group feature, allowing Door Phones can be unlocked only during valid time periods.
Optimization
Improved stability of monitor stream.
Optimized display of contact interface.
Version: 567.30.13.104 (Beta)
Release Date: December 9, 2024
Supported SmartPlus Version: V7.0
Fixed Bug
Fixed the issue of failed to disarm on the App.
Version: 567.30.13.103 (Beta)
Release Date: November 27, 2024
Supported SmartPlus Version: V7.0
New Features
Support HTTPS redirection.
Added Hold Delay feature for external RS485 relay, ensuring the door relay automatically resumes after the set delay time.
Added mutual exclusion for the three RS485 relay states when connected to rolling doors or curtains, ensuring only one relay can be active at a time.
Set the first unlock icon on the Talking Page as enabled by default, while the second and third icons are disabled.
Added two unlock icons on Call Page, which are disabled and set to Remote Relay HTTP by default.
Added Preferred Network feature, which allow selecting the priority network when both wired and wireless connections are active.
Optimization
Optimized Spanish language entries.
Version: 567.30.12.902 (Release)
Release Date: October 24, 2024
Supported SmartPlus Version: V7.0
New Features
Set the door phone RTSP default username and password, which are both admin.
Added secondary confirmation pop-up for adding contacts to the blocklist.
Support setting screen sleep time on the web portal.
Support modifying device language on the web portal.
Enlarged pop-up and the font size of notifications on the PBX page to enhance aesthetics.
Version: 567.30.12.802 (Beta)
Release Date: September 24, 2024
Supported SmartPlus Version: V6.8
New Features
Hid HTTP switch and HTTP port on the web interface.
Optimized DND mode notification message and added status bar icon.
Aligned web font with users' browser settings.
Standardized font of device interfaces for consistency.
Support SANWO RS485 expansion relay with power-off system functionality to retain configurations after power restoration.
Support RTSP passwords with special characters for third-party cameras.
Enhanced security by clearing previously set security questions and answers when modifying them on the web portal.
Optimizations
Optimized UI of RS485 device control interface.
Version: 567.30.12.509 (Beta)
Release Date: July 25, 2024
Supported SmartPlus Version: V6.7.1
New Features
Optimized French entries.
Version: 567.30.12.603 (Beta)
Release Date: July 18, 2024
Supported SmartPlus Version: V6.7.1
New Features
Added a pop-up alert for IP address conflicts.
Added Forget Wi-Fi option.
Version: 567.30.12.506 (Beta)
Release Date: July 12, 2024
Supported SmartPlus Version: V6.7.1
Optimization
Improved Spanish texts.
Version: 567.30.12.503 (Beta)
Release Date: June 17, 2024
Supported SmartPlus Version: V6.7.1
New Features:
Modified the "forgot password" prompt and reset password method.
Added bistable relay functionality.
Support Polish language.
Support viewing remaining storage space.
When the device receives a notification, it wakes up the screen and only displays the notification in the pull-down status bar, with others hidden.
Support controlling zones via API.
Optimized the WiFi interface.
Support parsing the Security Relay field in contacts sent from the cloud for remote door opening.
Added a separate switch to set whether an incoming call can simultaneously trigger the relay.
Version: 567.30.12.403 (Beta)
Release Date: May 23, 2024
Supported SmartPlus Version: V6.7.1
New Features
1.Added "skip all autop" command to preserve Autop configurations when the end user applies new initialization settings.
2.Support external relay to add light, lock, curtain, and so on.
3.Support using HTTPS protocol to visit webpage.
4.Enabled the device to automatically return to the homepage when the screen goes black or at regular intervals while on the monitor page.
5.The language of web page can be synchronized with browser setting automatically.
6.Optimized lock feature:
(1)Support configuring different relays for unlock icons on call page.
(2)Set type of softkeys in talking, preview, monitor page as is configured on cloud by default.
(3)Added unlock shortcut on homepage and More page.
7.Optimized use experience.
8.Optimized troubleshooting feature.
Version: 567.30.12.307 (Beta)
Release Date: May 11, 2024
Supported SmartPlus Version: V6.7.1
New Features
Added pop-up for alarm delay, requiring disarm code to cancel a triggered alarm.
Version: 567.30.12.305 (Beta)
Release Date: April 27, 2024
Supported SmartPlus Version: V6.7.1
New Features
1.Required a password change upon the first login to the web interface and added a new security question feature.
2.Support selecting restore factory settings option when upgrade via cloud.
3.Changed the HTTP door opening command "door num" to start from 1.
4.Adapted the device web interface to different resolutions of the user's PC.
5.Optimized bulk deployment of Autop.
6.Support switching between steady-state and bistable modes for relay.
7.Added quick door opening shortcuts to the homepage.
8.Support configuring Speed dial buttons on the home page.
9.Hid unlock button during calls.
10.Enabling display third-party camera in call mode. Devices, used as either callers or receivers, can be invoked during call previews and conversations.
11.Prevented disconnections by stopping complete screen dimming when running third-party smart home apps.
12.Added an account configuration option in the Call Forward path of web interface's.
13.Support configuring three door opening buttons to open different relays on the monitoring interface.
14.Support triggering alarms by HTTP commands.
15.Optimized Alarm function.
16.Optimized French texts.
Version: 567.30.12.102 (Beta)
Release Date: April 1, 2024
Supported SmartPlus Version: V6.7.1
Fixed bugs
Fixed the SIP register fail issue.
Fixed the issue of Wi-Fi malfunction after upgrading on the web interface.
Version: 567.30.12.3 (Release)
Release Date: March 5, 2024
Supported SmartPlus Version: V6.7.1
New Features
1.Support for Arabic, Ukrainian, Italian, French, German, Dutch, and Polish languages and optimize Traditional Chinese entries.
2.Support displaying weather forecasts after adding a Temperature Unit module to the cloud.
3.Support for scheduled screensavers.
4.Support for closing or moving the local camera window in the call interface.
5.Moved the Wi-Fi function to the basic path.
6.Deployed timezone files after adding to the cloud.
7.Support Auto Hang Up feature, which can set Max Call Time. Calls will automatically be hung up when reaching the specified time.
8.Support for directly jumping to third-party web page links when viewing messages.
9.Support for deploying messages of up to 4069 bytes.
10.Support for the remote doorbell.
11.Synchronized the default DTMF value of the door phone.
12.Hid the three virtual buttons at the bottom of the screen when running third-party apps.
13.Support for users to export entries for translation into other languages.
14.Support for controlling RTM Relay via RS485.
15.Integrated with the Crestron App.
16.Hid virtual buttons automatically after 10 seconds of inactivity when running third-party apps and set the network indicator, date, and time at the top of the device to be hidden by default.
17.Support for switching security modes via HTTP commands.
18.Support for DND HTTP interface.
19.Displayed the calling door phone model above the call interface.
20.Support for configuring and controlling multiple RS485 Relays.
21.Compatible with third-party cameras.
22.Pre-installed Google apps.
23.Enhanced the user experience of the touchscreen.