--- title: "Set up Duress Code on the Akuvox Door Phone" slug: "set-up-duress-code-on-the-akuvox-door-phone" updated: 2026-06-15T08:09:23Z published: 2026-06-15T08:09:23Z canonical: "knowledge.akuvox.com/set-up-duress-code-on-the-akuvox-door-phone" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Set up Duress Code on the Akuvox Door Phone The duress code is a special PIN designed for emergency situations. When a valid duress code is entered, the door is unlocked as usual, while the configured Action URL is sent to notify external systems or initiate predefined actions. ## Compatible Model and Minimum Version S535: 535.30.11.13 ## Step 1: Add the Duress Code for a User 1. Navigate to the device IP in a browser. Log in with the username and password(**admin/admin** by default). 2. Go to **Directory > User**. 3. Click **+Add** to add a user. Or, click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-GW6KFEIC.png) to modify a current one. 4. Enter the code(4-6 digits) in the **Duress Code** section. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-7LPDQ8UZ.png) 1. Click Submit after finishing other access settings. > [!NOTE] > Note > > Each duress code should be unique, not the same as the public PIN, private PIN, or duress codes assigned to other users. ## Step 2: Set up the Action URL 1. Go to **Setting > Action URL**. 2. Enable the **Action URL** feature. 3. Enter the URL to be sent in the **Duress Code Alarm** field. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1NIRPRX4.png) 1. Click Submit. ## Step 3: Test the Setup After configuration, test the duress code by entering it for door opening. Ensure that the Action URL is sent to the designated server as intended.