Akuvox indoor monitor system settings can be either accessed on the device or its web interface.
Device Start-up Network Selection
After the device boots up initially, you are required to select the network connection for the device. You can either select Ethernet or wireless network connection.
(1).jpg "akuvox-c319nbspseriesnbspindoornbspmonitornbspadministratornbspguidenbsp202209-image-q00dieli(1)(1).jpg")
Note
Please refer to the chapter Network Setting & Other Connection for the network configuration.
Access the Device Settings
Access Basic Settings
You can access the device's basic and advanced settings where you can configure different types of functions.
To access the device's basic settings, swipe your finger left on the home screen, then tap the Setting icon
. You can check the basic information like MAC, firmware, etc.
Access Advance Settings
To access the advanced settings, press Settings and then tap Advance. Enter the default password 123456.
Access Web Settings
You can enter the device IP address in a browser and log into the device web interface where you can configure and adjust parameters.
You can check the IP address on the device Settings > System Info > Network screen. You can also search the device by IP scanner, which can search all the devices on the same LAN.
Note
Download IP scanner:
https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IPSee the detailed guide:
https://knowledge.akuvox.com/v1/docs/en/how-to-obtain-ip-address-via-ip-scanner?highlight=IP%20ScannerGoogle Chrome browser is strongly recommended.
The initial username and password are admin and please be case-sensitive to the user names and passwords entered.