Door phones' system settings can be either accessed on the device or on its interface.
Access the Device Settings on the Device
Before configuring the door phone, please make sure the device is installed correctly and connected to a normal network.
You can set up some basic settings on the device screen by pressing 9999 + Dial key + 3888 (password) on the Dial screen.
Access the Device Web Settings
You can enter the device IP address in a browser and log into the device web interface where you can configure and adjust parameters.
Check the device IP on the Setting > System Info > Network screen. Or, use the IP scanner to scan device IPs on the same local network. Enter the IP in a browser to see the login page.
Note
Download IP scanner:
https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IPSee the detailed guide:
https://knowledge.akuvox.com/v1/docs/en/how-to-obtain-ip-address-via-ip-scanner?highlight=IP%20ScannerGoogle Chrome browser is strongly recommended.
The initial user name and password are admin and please be case-sensitive.
Your computer should be on the same network as the device.