Door phones' system settings can be either accessed on the device or on its interface.
Access the Device Settings
You can set up some basic settings on the device screen by pressing 9999 + Dial key + 3888 (password) on the Dial screen.
Gesture Control Setting
When the device is in the Building or Villa theme, tap on the time area ten times on the device’s home screen to access the settings screen. The default password is 3888.
To enable the feature, navigate to the web Intercom > Basic interface.
Access Device Web Settings
You can also enter the device IP address on the web browser to log in to the device web interface, where you can configure parameters, etc.
You can check the IP address on the device Settings > Info screen.
Or, use the IP scanner to scan the device IPs on the same LAN.
Note
Download IP scanner:
https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IPSee the detailed guide:
https://knowledge.akuvox.com/v1/docs/en/how-to-obtain-ip-address-via-ip-scanner?highlight=IP%20ScannerGoogle Chrome browser is strongly recommended.
The initial user name and password are admin and please be case-sensitive.
Your computer should be on the same network as the device.