Compatible Third-Party Devices

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

/

HyPanel: 51.1.36.24 & later

HyPanel Pro: 71.1.38.9 & later

Sync devices in akubela system with Alexa for seamless control

The cloud-to-cloud integration requires authorizing akubela on the Alexa app and logging with the akubela app account.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

/

HyPanel Pro: 71.1.35.30 & later

Activate scenes via Siri in BelaHome app

Supported on all iOS phones

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

/

HyPanel: 51.1.31.30 & later

HyPanel Pro: 71.1.31.61 & later

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Works with Alexa

HyPanel: 51.1.31.30 & later

HyPanel Pro: 71.1.31.61 & later

1. Sync akubela devices with Alexa app to control them via Alexa app or Amazon Echo

2. Voice control devices in both systems via HyPanel

Same as Works with Alexa

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Home app

HyPanel: 51.1.23.71 & later

HyPanel Pro: 71.1.31.61 & later

Sync akubela devices with Home app

Bind HyPanel with the Home app by scanning the QR code.

Ensure HyPanel and phone are on the same LAN.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Google Home app

HyPanel: 51.1.25.31 & later

HyPanel Pro: 71.1.31.61 & later

Sync akubela devices with Google Home app to control them via Google Home app Google Speaker.

Cloud-to-cloud integration requires HyPanel to be connected to the Internet and logged into the Google Home app account.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Spotify app

HyPanel Pro: 71.1.37.39 & later

HyPanel Supreme: 1001.1.38.113 & later

HyPanel Ultra: 281.1.38.114 & later

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

DK-RC-WMP-1（IBWMPDAI001R000）

V3.2.0 & later

1. Thermostat:Set temperature, AC mode, wind speed and air swing mode.

2. Serve as trigger/condition/task in scenes.

1. Reset the device: Press and hold the reset button until the white light flashes and then the green stays on.

2. Connect the phone to the device's hotspot: DEVICE_{the last 6 digits of the MAC address}.

3. Enter 192.168.10.1 in the browser on the mobile phone.

4. Click “Login” in the upper right corner and log in with the account and password “Admin/admin”.

5. Click on the icon with three horizontal lines in the upper right corner, and choose “Configuration” to enter the configuration page.

6. Scroll to the bottom of the page, select the LAN Wi-Fi, click “Select” on the right side, and enter the Wi-Fi password. Scroll up and click “Save” in the upper right corner.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

CoolMaster+LG

V3.2.0 & later

1. Thermostat: Set temperature, AC mode, wind speed and air swing mode.

2. Serve as trigger/condition/task in scenes.

1. Power on and connect to LAN.

2. Download the CoolMaster.

3. Open the software, enter number 2 and the device IP, and press Enter. Ensure the device IP is on the same network segment as your computer.

4. Enter “simul L3 6” in TenwaysCom and press Enter.

5. Find the device and add it via the Belahome app.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Ecobee 4

V3.2.0 & later

1. Adjust HVAC mode, target temperature, fan modes, and preset modes.

2. Serve as a task in scenes.

1. Download the Ecobee app and register an account.

2. In the BelaHome app or user web, search for Ecobee via Ecosystem, enter the API Key, and record the PIN code.

3. Log in to the website https://www.ecobee.com/en-us, click “Sign in” → “Sign in to your account” → Enter the account and password from Step 1 to log in → click “Me” → “My apps” → “Add application” → enter the PIN code from Step 2 → click “Validate”.

4. Once validated, click “Next”, select a room, edit the name, and submit.

5. Control, edit, or remove the Ecobee device via the BelaHome app.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Roller Shutter 3

FGR-223

HyPanel: 51.1.31.30 & later

HyPanel Pro: 71.1.31.37 & later

1. Open/close/pause curtains.

2. Serve as trigger/condition/task in scenes.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

myLink WIFI to RTS Interface

V3.2.0 & later

1. Open/close/stop curtains.

2. Serve as trigger/condition/task in scenes.

1. Download the Somfy app.

2. Press the button on the Somfy hub; the red LED will flash.

3. Connect the phone to Somfy’s Wi-Fi, open the Somfy app, then follow the instructions to scan and configure devices.

4. In the Somfy app, go to Setting > Remote to control the curtain device.

5. On the same LAN, open the Belahome app, tap the curtain card, enter the ID(123456789) and IP(the IP under the router).

Somfy-Tahoma shade 5153854C

V3.1.0 & later

1. Open/close/stop curtains.

2. Serve as trigger/condition/task in scenes.

1. Use the TaHoma app to add a gateway and a virtual curtain device.

2. Add TaHoma via the BelaHome, then complete setup by entering the username and password.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

E1752-60

V3.2.0 & later

1. Open/close/stop curtains.

2. Serve as trigger/condition/task in scenes.

1. Reset the curtain by pressing and holding both buttons for 5 seconds until the LED flashes once.

2. In the BelaHome app, tap IKEA-Curtain card to scan and add the device.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Dooya Tubular Motor

DM35S 220V

V3.2.0 & later

1. Open/close/stop curtains.

2. Serve as trigger/condition/task in scenes.

Connect HyPanel to the shade motor, then set the relay type as Shade in the BelaHome app.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

AutoMate Shade Motor

V3.2.0 & later

1. Open/close/stop curtains.

2. Serve as trigger/condition/task in scenes.

1. Ensure the AutoMate gateway and devices are on the same LAN; no reset is needed.

2. In the app, enable device addition (top right), select Automation, enter the AutoMate gateway’s IP, click Next, and follow the prompts to complete the addition.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

ZDS-111L-3

ZDS-161Z

ZMW-Z03L

ZMG-UKZG03W

ZMG-UKZGWW/B

ZDS-112L-G3

ZKES-606EU-Z3L

Zigbee Touch Curtain Switch (Left & Right)

Zigbee Touch Dimmer Switch

HyPanel: 51.1.31.30 & later

HyPanel Pro: 71.1.31.37 & later

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Aqara Curtain Driver E1 (Track Version)

V3.1.0 & later

Open/close/stop curtains.

ZNJLBLO1LM

HyPanel: 51.1.31.30 & later

HyPanel Pro: 71.1.31.37 & later

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

YRD216

V3.2.0 & later

1. Open/close/stop curtains.

2. Serve as trigger/condition/task in scenes.

1. Factory Reset:

   On the keypad, go to Settings → enter PIN (12345678) → Settings → press 7 → Settings → press 3 → Settings → device is successfully restored.

2. Enter Pairing Mode:

   
   

   On the keypad, tap Settings in the bottom-right corner → enter the PIN 12345678 → tap Settings → press 7 on the keypad → tap Settings → press 1 on the keypad → tap Settings. The lock will enter pairing mode.

3. Add the Lock:

   
   

   In the BelaHome app or the web portal, go to Ecosystem and search for Lock. Once the device is discovered, tap Next, select the room, edit the device name, and tap Submit to complete the setup.

KYRA PRO

Yale Linus Smart Lock

ASL-06

SL-103

V3.2.0 & later

1. Open/close doors.

2. Check lock’s battery level.

1. Install batteries; factory reset is not required.

2. Download Yale Home and register an account.

3. Configure the lock in the Hub.

4. Add the lock in Yale Home.

NOTE:

Before using the deadlock function, calibrate the lock by turning the thumb turn fully to the right to retract the bolt.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Q-SL2

V3.2.0 & later

1. Open/close doors.

2. Check lock’s battery level.

3. .Serve as trigger/condition/task in scenes.

1. Install batteries; Factory reset is not required.

2. Download the Qrio Lock app and register an account.

3. Add the lock.

4. Configure the Hub.

5. Enable the auto lock function: In the app, tap Setting > Auto Lock, enable it, then tap Setup, and follow the prompts to set the lock.

6. Enable contactless unlocking (lock automatically unlocks when approaching with your phone).

7. Lock calibration: In the app, tap Setting > When you can't operata the Lock, and follow the onscreen instructions.

8. In BelaHome app, select Qrio on the device adding screen, and follow the onscreen instructions.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Tedee lock PRO

V3.2.0 & later

1. Open/close doors.

2. Check lock’s battery level.

3. .Serve as trigger/condition/task in scenes.

1. Use the Tedee app to add the Tedee gateway following the onscreen instructions.

2. Add the lock via the app according to the installation steps.

3. In BelaHome app, add the Tedee system by entering the Tedee app account and password.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

XS4 Original

V3.2.0 & later

1. Open/close doors.

2. Serve as trigger/condition/task in scenes.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

/

V4.0.0 & later (when used in public areas)

1. Open/close doors.

2. Serve as trigger/condition/task in scenes.

1. Download the Lockly app and add the lock.

2. Request API access from the Lockly official website.

3. Log in to the akubela cloud using an installer account and add the lock API under Third-party Devices.

4. Assign the lock to a home, building, or public area.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

/

V4.0.0 & later (when used in public areas)

1. Open/close doors.

2. View battery level.

3. Serve as trigger/condition/task in scenes.

1. Download iTEC On Access, log in to the app, and add the lock and gateway via Bluetooth.

2. Log in to akubela cloud using an installer account and add the lock API under Third-party Devices.

3. Assign the lock to a home, building, or public area.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

/

V4.0.0 & later

1. Open/close doors.

2. View battery level.

3. Serve as trigger/condition/task in scenes.

1. Download and log in to the TTLock app, and add the lock and gateway via Bluetooth.

2. Add the lock in the BelaHome app, then enter your TTLock account and password to complete the setup.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

SONOS Roam SL

V3.2.0 & later

1. Playback control: play/pause.

2. Adjust volume.

3. Previous track.

4. Serve as trigger/condition/task in scenes.

1. Download the Sonos app and register an account.

2. Press and hold the ||< key and the side power button simultaneously. Release the power button while continuing to hold ||< until the indicator flashes orange and white, then release ||<.

3. Ensure the app’s Wi-Fi is on the same LAN as the HyPanel device.

4. On the app or web, search SONOS in Ecosystem, scan the device, click Next, select a room, edit the name, and then submit.

5. Once the Sonos icon appears in BelaHome, you can control, edit, and remove it.

SONOS Beam Gen2

1. Press the button beside the network port to power on the Sonos. When the orange and white lights flash alternately, release the button. When the green indicator light flashes, the reset is complete.

2. The device will appear automatically. Follow the on-screen instructions to add it, bringing your phone’s NFC close to the device during the adding process.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Ring Video Doorbell 4

V3.2.0 & later

1. Ring alerts and notifications.

2. Adjust volume.

3. Serve as trigger/condition/task in scenes.

1. Download the Ring app. Follow the instructions to add the Ring Doorbell.

2. To get the verification code: open the app menu → select Account Settings → tap Two-Step Verification → click Authorize a New Device.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Light1

Light2

Light3

V3.2.0 & later

1. Light control: on/off, brightness, color, and color temperature.

2. Serve as trigger/condition/task in scenes.

1. Connect the light to a 220V power supply, connect Hue to the network via Ethernet, and ensure Hue is on the same LAN as the HyPanel device.

2. Download the Philips Hue app. Ensure Hue and your phone are on the same LAN as HyPanel device, and follow the prompts to add the gateway (this step loads 3 default lights but can be skipped if only connecting to the HyPanel device).

3. In the app or web, search for Hue by type(or let it auto-discover) → click the icon → press the button on Hue briefly as prompted → select a room, edit the name → submit.

4. The lights will then appear in BelaHome, where you can control, edit, or remove them.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

TP-Link Kasa

V3.2.0 & later

1. Turn on/off lights.

2. Serve as trigger/condition/task in scenes.

1. Download the Kasa Smart app and register an account.

2. Connect the light to a 110V power supply and reset it by turning the switch on and off six times.

3. In the app or web, search for Kasa under Ecosystem. After scanning, click Next → select a room → edit the name → submit.

4. Once the device appears in BelaHome, you can control, edit, or remove it.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Lutron Connect

V3.2.0 & later

1. Turn on/off lights.

2. Serve as trigger/condition/task in scenes.

1. Download the Lutron Connect app.

2. Connect the Lutron app to the gateway (light ring stays solid when connected).

3. Add devices(wall-mounted dimmers/switches/fan controls) in the Lutron app.

(If already bound, skip steps 1–3 and integrate directly with HyPanel device.)

4. Ensure the Lutron gateway and HyPanel device are on the same network.

5. In the BelaHome app or web, search for Lutron under Ecosystem. Enter scanning mode → briefly press the gateway button → once scanned, click Next → select a room → edit the name → submit.

6. After the device appears in BelaHome, you can control, edit, or remove it.

Lutron Dimmer

V3.2.0 & later

1. Log in to the Lutron app.

2. Click the settings button on the gateway interface.

3. Click “Add Device” and select the plug-in dimmer.

4. Add the device under the Lutron gateway according to the onscreen instructions.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Light Generation1

V3.2.0 & later

1. Turn on/off lights.

2. Serve as trigger/condition/task in scenes.

1. Download & Log In
   Download the Yeelight App and log in with an existing Beijing-region account or register a new one.

2. Add the Light

   Reset the light by turning it on/off 5 times (2s on, 2s off). A color flash indicates a successful reset.

3. In the Yeelight App, scan for devices → select the light → enter the Wi-Fi password → tap Next → edit the name → tap Next.

   • Alternative: Device → + → Add Device → Bulb → Color Light Bulb 1S.

4. Add to akubela
   Ensure the Yeelight light and BelaHome App are on the same LAN. In BelaHome, scan and add the device.

Light Generation2

1. Light control: on/off, brightness, color, and color temperature.

2. Serve as trigger/ condition/task in scenes.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Shelly 1L

Shelly EM

Shelly 3EM

Shelly Plus1

Shelly Plus 1PM

Shelly Pro 1

Shelly Pro 2

Shelly Pro 3

V3.2.0 & later

1. On/Off control

2. Available as scene triggers/conditions/tasks

1. Download the Shelly app.

2. Press the button for 5 seconds to reset until the red LED starts flashing.

3. Click Settings in the upper right corner → Add device → Enter Wi-Fi password → Next → Select the specific Shelly device → scan device → edit room name/picture → complete setup.

4. Go to Settings → Discovered devices to view added devices.

5. In the BelaHome app, scan and add the device on the same LAN.

Shelly Plus 2PM

Shelly Pro 2PM

1. Switch: On/Off Control

2. Curtain: Open/Close/Stop

3. Available as scene trigger/condition/task

Shelly Dimmer 2

1. On/Off control

2. Brightness control

3. Available as scene trigger/condition/task

Shelly DUO

1. On/Off control

2. Brightness control

3. Color temperature adjustment

4. Available as scene trigger/condition/task

Shelly DUO RGBW

1. On/Off control

2. Brightness control

3. Color change

4. Color temperature adjustment

5. Available as scene trigger/condition/task

Shelly 1 Gen3

Shelly 1PM Gen3

Shelly 1PM Mini Gen3

Shelly 2PM Gen3

Shelly 2L Gen3

Shelly 1 Mini Gen4

Shelly 2PM Gen4

Shelly Pro 4PM

V4.0.1 & later

1. On/Off control

2. Available as scene triggers/conditions/tasks

Shelly DALI Dimmer Gen3

Shelly Dimmer Gen3

Shelly Dimmer 0/1-10V PM Gen3

1. On/Off control

2. Brightness control

3. Available as scene trigger/condition/task

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

All BTICINO switches

V3.2.0 & later

Serve as trigger/condition/task in scenes.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Aqara Single Switch T1 (With Neutral)

V3.1.0 & later

On/off control.

Aqara Single Switch T1 (No Neutral)

Aqara Wireless Remote Switch H1 (Double Rocker)

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Hub

1. Press and hold the D button on the side of the hub for 20 seconds. Release it when the blue LED starts flashing.

2. Connect your mobile phone to the hub’s network, and enter the IP address in the browser to access the settings page.

3. Go to Settings → Network and connect the hub to your Wi-Fi.

4. After connection, check the hub’s IP address in the router. Log in via browser.

5. Go to Settings → Device → Z-Wave → Add → Next, then reset the device to complete pairing.

6. On the same LAN, open the BelaHome app, tap the curtain card, and add the device by entering the URL, username, and password.

Shade

Open/close/stop curtains.

Press the test button 3 times consecutively when adding and deleting.

Apex Thermostat

1. Switch modes, adjust fan speed levels, and set target temperature.

2. Serve as trigger/condition/task in scenes.

Press and hold the upper left corner to configure the network and pair it with the Fibaro gateway.

2-Gang Switch

1. Turn on/off the device.

2. Serve as  trigger/condition/task in scenes.

Press the test button 3 times consecutively when adding and deleting.

Dimmer

1. Turn on/off lights.

2. Adjust brightness.

3. Serve as trigger/condition/task in scenes.

Smoke Sensor

1. Detect smoke and temperature.

2. Serve as trigger/condition in scenes.

Press test button 3 times consecutively when adding and deleting.

Flood Sensor

1. Detect flood and temperature.

2. Serve as trigger in scenes.

Remove the back cover, then press the reset button 3 times consecutively when adding and deleting.

Door Sensor

1. Detect door status and temperature.

Heat Controller

1. Detect temperature.

Motion Sensor

1. Detect motion and temperature.

CO Sensor

1. Detect CO and temperature.

Illuminance Sensor

1. Detect Light Level.

Lock

1. Unlock and lock the door.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Lutron 7th-Generation Gateway Shade

V3.2.0 & later

1. Open/close/stop curtains.

2. Control travel.

1. Download the Lutron app.

2. Connect to the Lutron gateway to power and network.

3. Open the Lutron app, select Professional Mode, and enter the account and password.

4. Select HomeWorks/Athena mode, then choose the test1 system to enter the app.

5. Adding devices to Lutron.

6. Ensure the Lutron gateway and HyPanel device are on the same network.

7. On the app or web, search “Lutron” in Ecosystem, enter scanning mode, press the gateway button, then select a room, edit the name, and submit.

Lutron 7th-Generation Gateway Dimmer

V3.2.0 & later

1. Turn on/off lights.

2. Adjust the brightness.

3. Serve as  trigger/condition/task in scenes.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Shot-screen Gateway Shade Fan

HyPanel Ultra:

281.1.38.317 & later

HyPanel Supreme:

1001.1.38.313 & later

SmartPanel:

933.1.38.313 & later

SmartPanel Elite 10: 119.1.38.31 & later

HyPanel:

51.1.36.314 & later

HyPanel(V2):

251.1.36.306 & later

HyPanel Plus:

52.1.36.307 & later

HyPanel KeyPlus: 53.1.36.307 & later

HyPanel Lite:

41.1.36.40 & later

1. Open/close/stop curtains.

2. Control travel.

1. Download the Bond Home app.

2. Click + at the top right to add a Bridge.

3. Follow the steps to add Bond 2.71.

4. Select Bond to add.

5. Enter the PIN labeled on the back of the gateway.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

Aqara Water Leak Sensor

V3.1.0 & later

Detect water leakage.

Aqara Motion Sensor P1

Detect motion.

Aqara Occupancy Sensor

Detect human presence.

Aqara Temperature and Humidity Sensor

Measure temperature and humidity.

Tested Model

Compatible akubela Products & Firmware

Capability

Integration

Process/Requirements

/

HyPanel:

51.1.40.206

HyPanel Pro:

71.1.40.196

1. Security arming and disarming

2. Relay and WallSwitch control

3. Alarm Pop-ups and audible alerts

4. Panic alarm support