Control Devices

Control a single device

Relay

HyPanel Supreme allows you to enable or disable its own relays as well as those of other devices. You can only control the relay's on/off state after it has been enabled.

Enable and disable relay

In the PHX1-ST version of HyPanel Supreme, the six relays are disabled by default. In contrast, relays are enabled by default on other relay-supported devices, including most HyPanel models (except HyPanel Ultra) and 1–4 gang switches.

To enable or disable a relay, go to > Advance Settings > Relay Settings and select the desired device.

NOTE:
Relays 1-4 of HyPanel Supreme are high-voltage relays, suitable for connecting lights, switches, curtain motors, and valves. Relays 5-6 are low-voltage relays, intended for door locks and sirens.

Control a relay

To open a relay, select the Electric from from left-side menu, and tap the ON/OFF button.

Modify relay’s type

To change the type of a relay, do as the following:

NOTE:
Changing the relay type will remove it from any scenes, group controls, or shortcuts added to the home page.

• Find the desired relay, and enter its interface. Tap  > Device Type.

• Go to > Advance Settings > Relay Settings, then tap > Device Type.

Switch, plug, and socket

To turn on your switch, socket, siren or a light, simply tap the ON/OFF button.

Lighting devices

For lights that can only be turned on or off, simply tap the ON/OFF button.

For others like RGB lights, you can adjust their brightness directly by adjusting the slider, or tap the device card to access more control options:

• To turn a light on or off, tap the ON/OFF button.

• To adjust the brightness and the color temperature, drag their sliders.

• To change the light color, swipe left and pick the desired color from the palette.

Heating, cooling, and thermostat

You can turn on/off the device or adjust the target temperature directly on the Clime screen:

Or tap the device card to access more control options:

• Tap  to switch modes.

• Tap  to to set the fan speed.

• Tap  or  , or drag the slider, to adjust the desired temperature ranging from 5-35℃.

• Tap  to turn the device on or off.

Shade

On the Shades screen, you can control shades or curtains by doing as the following:

• Tap  to open the shade.

• Tap  to close the shade.

• Tap  to stop the shade when it reaches the desired position.

• Tap  >  to access advanced settings.

NOTE:

Available functions may vary depending on the shade model.

• Shade Type: Set the type of shade or blind.

• Shade Calibration: Adjust the opening and closing duration of the curtain. Follow the onscreen instructions to calibrate.

• Shade Reversal: Reverse the direction of curtain movement if the open and close buttons operate in the opposite direction.

Speaker

To control speakers, go to Media screen, then select the desired device.

Group control devices

HyPanel Supreme enables convenient one-touch control for individual spaces or entire device categories. It supports grouped lighting management and multi-control associations to synchronize device states across linked devices.

One-touch device control

On the upper right of some feature screens (e.g., Lights and Electric screens), tap the control buttons to turn all devices of the same type on or off at once.

Lighting group control

You can group multiple lights for simultaneous control, making it easy to adjust brightness, color, and power status across different locations within the same room.

NOTE:

• The device group should be created using the BelaHome app (Go to the home page, tap any desired device  > Device Group, and add devices into the group). Once created, a group card will appear in the Lights screen for easy one-touch access.

• Group Control Capabilities

  • Devices with the same capabilities (e.g., RGB lights) will display those capabilities for the entire group.

  • Devices with different capabilities will only display the common capabilities in the group. For example, if a switch light and a dimmable light are grouped, only the switch capability will be shown.

You can tap > on the upper right of the group card to view all devices in the group.

Multi-control association

This feature links switches and lights to keep their on/off states synchronized. When one device changes state, all associated devices update accordingly. For example, if multiple switches control the same light, associating them ensures they reflect the same on/off status.

1. In the left sidebar on the home page, select Lights or Electric.

2. Tap the desired device card.

3. Then tap > Multi-Control Association.

4. Tap Device Sync.

5. Select the devices you want to associate. Tap  to complete.

6. The associated devices will appear in the list.

Virtual three-level dimming group

For unified control of non-dimmable lights (on/off only), you can create a virtual three-level dimming group. This allows you to assign a set number of lights to each brightness level for group control.

NOTE:

This feature must be configured in the user web portal (via Dimming Group > Add) before the control card will appear on the Lights screen.

Use the intercom

Unlock door remotely

When you know who is at your door, you can open the door directly without communicating with the door phone.

1. Tap Security on the Home screen.

2. Find the desired door phone, and do any of the following:

• Tap  to open the door directly.

• Tap  to view the live video feed.

• Tap  for additional options, such as taking a screenshot.

TIP:

If multiple doors are connected to the door phone, a pop-up list will let you select which one to open.

Unlock door before answering a call

When you receive a call from the door phone with a camera, you can preview its monitoring streaming and open the door without answering the call.

Unlock door during a call

You can answer the door phone call and unlock the door during the call.

To unlock the door, tap .

To capture the monitor streaming screen, tap .

You are also able to call the door phone to see and hear who the visitor is. To do so, see the section Make one-to-one voice calls in this guide.

View monitoring feed

If the connected door phone has a camera, you can view its monitoring stream without making a call.

• To see the feed, find the desired door phone, and tap .

• Tap the icon  in the upper right corner to switch between available camera feeds.

• Tap  to capture a screenshot of the live feed.

• Tap  to open doors.

Link a sub-camera

If the area requiring access control is not covered by the door phone’s built-in camera, you can link a sub-camera to the door phone. Once linked, you can switch between views during previews or calls.

NOTE:

This setting is only available via the device web portal (Go to Set Mode > [The desired door phone] > Link Camera to configure).

See Screenshots of monitor streaming

HyPanel Supreme automatically captures a picture of the monitoring stream when it receives a call from door phones.

You can also manually capture the monitor screen at any time while answering the door phone's call or viewing its surveillance.  

To see these screenshots, tap at the bottom right of the Home screen, and select Screenshot.