Enter Applications Screen
Le moniteur intérieur prend en charge les modes Utilisateur et Admin . En mode Admin, vous pouvez accéder à la fois aux applications tierces et par défaut.
To do the configuration on device Settings > System Info interface. You can press User Mode 10 times and press Admin Mode and press Confirm for confirmation.
Install Third-party App
You can install the third-party App to your device on the device web Phone > App interface. Choose a suitable .apk file from the PC to upload.
To configure the installed third-party app on web Phone > Key/Display > Third Party APK Control, you can click App Name field to select the specific name of the installed APK files for configuration. Then tick the check boxes of each field for the specific configuration you need.
Parameter Set-up:
- App Name: select the App Name to be configured.
- Interval Without Operating (Sec): tick the check box to set the app returning time interval when there is no operation on the device.
- Start Up Enable: tick the check box of Start UP Enable if you want the app to run automatically when the device is turned on.
- Turn Back App After Awakening: enable it if you want the device to return to the app when the screen is awakened.
- APP Keep-Alive : enable it if you want the app to stay running without being turned off.
- Turn Back App After Calling: tick the box if you want the app to return automatically after finishing a call (This feature applies to all the apps).
- Show App Icon: tick the box if you want the app icon to be displayed on the screen.
Smart Living Setting
You can control the home sensor through an HTTP command on the device web interface Phone > Smart Living.
Parameter Set-up:
- Status: Enable or Disable this button. If disabled, the button won't appear on the home control page.
- Icon: select On or Off. If On is selected, the icon is displayed as a yellow button. Select Off, the icon is a white button.
- Label: it is used to custom the button display name.
- HTTP command: set up the HTTP command to trigger the sensor.
Display Third-party Webpage after Booting Up
Si vous souhaitez que l’écran de l’appareil aille à des serveurs tiers ou à la page web tierce après le démarrage de l’appareil, vous pouvez entrer leur URL.
To set it up, you can go to Phone > Web View > URL.
Third-party Integration via API
Pour permettre aux appareils tiers de s’intégrer à l’écran intérieur, il faut configurer l’authentification API en créant un nom d’utilisateur et un mot de passe. Vous devez également sélectionner le code d’authentification pour l’intégration basée sur l’API.
To set the API authentication, go to Security > API.
Parameter Set-up:
- API: enable the API if you allow the device to be integrated with the third-party devices via API.
- Auth Mode: select the authentication mode.
- Allowlist: select it when you only allow the device in the allow list to integrate with the indoor monitor.
- Digest: select it when you apply the Digest mode for the third-party integration.
- User Name: type in the username used for the authentication.
- Password: type in the password used for the authentication.
- None: select none if allow all the devices to integrate with the indoor monitor with all forms of the authentication mode.
Before the API integration, you need to enable the API permission and create allow list by entering the location and IP address of the device to be integrated with the indoor monitor. To set it up, go to Security > Allowlist.
