HyPanel Elite 10 Firmware

[HyPanel Elite 10 Firmware (Click to download)]

Version: 159.1.40.111

Release Notes

Version:  159.1.40.111

Release Date: March 10, 2026

Supported akubela Cloud Version: v4.0.1

New Features

1. Robot Send

• After binding a robot station in the cloud, a 1×1 Robot function card appears on the homepage. The card supports sorting but cannot be removed.

• Tapping the card opens the robot service page with the following options:

  • Summon: Taps this option to start a task.

  • Robot is On the Way: The robot receives the command and moves to the user’s location.

  • Robot Arrived: When the robot arrives at the door, the device notifies the user via a simulated incoming call.

  • Picked Up: The user places the item in the robot compartment within 5 minutes and confirms the action.

  • Delivery Arrived: The robot delivers the item to the destination and the device sends a completion notification.

2. Liquid Level Sensor

• Added Liquid Level Sensor under Others on device addition screen.

• Supports status alerts, displaying three levels: Normal (White), Low-Level Alarm (Light Green), and High-Level Alarm (Red).

• Supports configuration of upper limit, lower limit, installation height, and maximum liquid depth.

3. Face Recognition

• Added General Face Data feature. Tap Edit icon to configure Show Personalized Home Themes by Facial Permissions, Personalized Home Themes, and Allow Access to Other Pages.

• When enabled, a Guest Entry button appears on the homepage lock screen. Users entering through this option can only access pages defined by the general face template. When disabled, the Guest Entry button is hidden.

4. Installer Settings

• Accessing Installer Settings requires a password (default: 000000).

• If the password is forgotten, it can be reset via Autop authentication.

5. Batch Construction

• For controllable devices (switches, lights, sockets, thermostats, valves, curtains), On/Off test buttons are added to identify devices. By tapping curtain devices’ Open and Close buttons, they operate for 5 seconds before stopping.

• When uploading a template: the room structure follows the template configuration; rooms not included in the template are automatically removed, and their devices are moved to the Others space.

• Scenes not included in the template are automatically removed after applying the template.

• Devices are automatically matched during template application. Matched devices show Correct status with a Clear option to remove the automatic match if manual reassociation is required.

6. Device Support

• Added support for Philips Hue Bridge Pro integration.

7. Scenes

• Added support for multi-state scene types.

• Added scene variable configuration and management.

• Added support for copying scenes.

• Added Smart Snapshot option for tasks.

• Added support for using door phone incoming calls as scene trigger conditions.

• Improved scene configuration interaction and usability.

8. Permission Management

• Added support for batch configuration of device permissions.

• Added support for batch configuration of BelaHome account permissions.

9. Basic Settings

• Adjusted adjustable temperature range logic.

• Added support for configuring global curtain direction indication.

10. Curtain Devices

• Added support for curtain direction indication configuration.

• Updated curtain card percentage display to represent closing percentage instead of opening percentage.

11. Others

• Added support for changing device icons in the app for light, air condition, and scene devices (requires the new UI version of the app).

• Enforced uppercase default password for HTTP access.

• Added support for uploading gateway and home center logs via the app.

• Added support for the following Shelly devices:

  • Shelly 1 Mini Gen4

  • Shelly 2PM Gen4

  • Shelly 1 Gen3

  • Shelly 1PM Gen3

  • Shelly 1PM Mini Gen3

  • Shelly 2PM Gen3

  • Shelly DALI Dimmer Gen3

  • Shelly Dimmer Gen3

  • Shelly Dimmer 0/1-10V PM Gen3

  • Shelly 2L Gen3

  • Shelly 4PM Smart Switch

Fixed Bugs

1. Fixed an issue where Energy Metering Display and Air Quality Display item titles sent via ETS on devices connected to F51-KNX base were not optimized or properly localized.

2. Fixed an issue where Hungarian language support was missing on the device.

3. Fixed an issue where the Polish Genway default app could not maintain login sessions.

4. Fixed an issue where RTSP streams could not be viewed on the device when the RTSP password contained “#” or “/” characters.

Version: 159.1.39.151

Release Date: January 7, 2026

Supported akubela Cloud Version: V4.0.0

Optimizations

1. Added display of the SN and FDSK information on the Engineering Mode > Full Device Test > Device Information page.

Fixed Bugs

1. Fixed an issue where the SN and FDSK were lost after performing factory reset verification.

Version: 159.1.39.146

Release Date: November 18, 2025

Supported akubela Cloud Version: V3.4.1

Fixed Bugs

1. Fixed an issue where the “Success” button in the PH59-KNX full-device programming test remained visible.

2. Fixed an issue where the call page brightness during full-device testing was below 100%.

3. Fixed an issue where SN burning on PH59-KNX devices was slow.

Version: 159.1.39.137

Release Date: September 30, 2025

Supported akubela Cloud Version: V3.4.1

New Features

1. Base Compatibility: Support both standard PoE and akubela-developed KNX built-in bases.

2. KNX Version Base:

   (1) Include one built-in relay output and eight digital inputs.

(2) Support all KNX devices listed in KNX databases.

3. Features:

(1) Base features are consistent with HyPanel Ultra V3.3.0.

(2) Differences from HyPanel Ultra:

A. Added dedicated terminals for doorbell connection.

B. Support infrared remote control.

C. Allow switching between horizontal and vertical display orientations.