Quick Start: This section provides quick access to the device’s key settings, such as network, user, relay, etc.
Device Management:
Status: This section gives you basic information, such as product information, network information, call log, door log, etc.
Account: This section concerns the SIP account, SIP server, proxy server, transport protocol type, audio and video codec, DTMF, etc.
Network: This section mainly deals with DHCP and Static IP settings, RTP port settings, device deployment, etc.
Intercom: This section covers intercom settings, call features, etc.
Surveillance: This section covers motion detection, RTSP, MJPEG, ONVIF, live stream, etc.
Access Control: This section covers access control method setup, input, and relay control.
Directory: This section involves user and contact management.
Device: This section includes light, LCD, audio, lift control, and Wiegand settings.
Setting: This section includes time, language, action settings, schedule for access control, screen display, and HTTP API.
System: This section covers device upgrade and maintenance.
Engineer Management: This section provides quick access to upgrading, maintaining, and debugging the device.
Introduction to Quick Start Module
The Quick Start module allows you to configure the device’s core features on a single interface, instead of switching between different interfaces.
You can redirect to the feature detail interface by clicking Details in the upper-right corner.
Network: Display the location information of the device.
Device Location: Enter the device’s location to distinguish it from others. By default, it is [the device name_the last 4 characters of its MAC address] in the Self-organizing Network Solution.
Server Mode: It is automatically set up according to the actual device connection with a specific server in the network, such as SDMC, Cloud, or None.
Auto-Discovery Contact List: Display the contacts, such as indoor monitors, in the Self-organizing Network Solution.
Show LCD Auto-Discovery Contact List: Set whether to display these contacts on the device screen.
Directory: Set the contact display mode.
All Contacts: Display all the contacts.
Groups Only: Display contact groups. Press the desired group on the device screen to make a group call.
Groups On Entry Page And Their Contacts On Subpage: Display contacts by groups. Press the group, and users can see the contacts in it.
Username: Set a username for authentication in HTTP command URLs.
Password: Set a password for authentication in HTTP command URLs.