Quick Start: This section provides quick access to the device’s key settings, such as network, user, relay, etc.
Device Management:
Status: This section gives you basic information, such as product information, network information, account information, etc.
Account: This section concerns the SIP account, SIP server, proxy server, transport protocol type, audio and video codec, DTMF, etc.
Network: This section mainly deals with network connections, RTP port settings, device deployment, etc.
Device: This section includes time & language, call feature, screen display, multicast, audio intercom feature, monitor, relay, lift control, etc.
Contacts: This section allows the user to configure the local contact list stored in the device.
Upgrade: This section covers firmware upgrade, device reset & reboot, configuration file auto-provisioning, and PCAP.
Security: This section is for password modification, account status & session time-out configuration, as well as certificates upload.
Settings: This section includes the RTSP settings.
Engineer Management: This section provides quick access to upgrading, maintaining, and debugging the device.
Introduction to Quick Start Module
The Quick Start module allows you to configure the device’s core features on a single interface, instead of switching between different interfaces.
You can redirect to the feature detail interface by clicking Details in the upper right corner.
Network: Display the location information of the device.
Connect Mode: It is automatically set up according to the actual device connection with a specific server in the network, such as SDMC, Cloud, or None.
Local Contacts List: Display local contacts.
Auto-Discovery Contact List: Display the contacts, such as door phones, in the Self-organizing Network Solution.
Show LCD Auto-Discovery Contact List: Set whether to display these contacts on the device screen.
Remote Relay by HTTP: Display the HTTP commands to remotely control relays connected to door phones.
Door Phone: You can add video streams of door phones via RTSP.
Show Building Door Phone: Set whether to display door phones at the building gate in the monitoring list.
Show Public Door Phone: Set whether to display door phones in the public area in the monitoring list.
Device Number: The device's SIP/IP number for identification.
Device Name: The device name for identification.
RTSP Address: The RTSP address of the monitoring device. RTSP format: rtsp://Device IP address/live/ch00_0.
Username: The username of the monitoring device for authentication.
Password: The password of the monitoring device for authentication.
Display In Call: Enable it to display the monitoring video during a call.