Quick Start: This section provides quick access to the device’s key settings, such as network, user, relay, etc.
Device Management:
Status: This section gives you basic information, such as product information, network information, account information, etc.
Intercom: This section includes basic call settings, user management, access methods, video streams setup, etc.
Account: This section concerns the SIP account, SIP server, proxy server, transport protocol type, audio & video codec, DTMF, etc.
Network: This section mainly deals with DHCP & static IP settings, RTP port settings, device deployment, etc.
Phone: This section includes time and language selection, volumes and tones configuration, logs, etc.
Contacts: This section is for contacts management.
Upgrade: This section is for upgrading the device firmware.
Security: This section includes web password modification, device debugging, maintenance, etc.
Engineer Management: This section provides quick access to upgrading, maintaining, and debugging the device.
Introduction to Quick Start Module
The Quick Start module allows you to configure the device’s core features on a single interface, instead of switching between different interfaces.
You can redirect to the feature detail interface by clicking Details in the upper right corner.
Network: Display the location information of the device.
Device Location: Enter the device’s location to distinguish it from others. By default, it is [the device name_the last 4 characters of its MAC address] in the Self-organizing Network Solution.
Connect Type: It is automatically set up according to the actual device connection with a specific server in the network, such as SDMC, Cloud, or None.
Directory: Display local contacts. Click Add to add a new contact after filling in its information.
Contact Display Mode:
All Contacts: Display all the contacts.
Groups Only: Display contact groups. Press the desired group on the device screen to make a group call.
Contact Display by Group: Display contacts by groups. Press the group, and users can see the contacts in it.
Username: Set a username for authentication in HTTP command URLs.
Password: Set a password for authentication in HTTP command URLs.