Language
Set up the language during initial device setup or later through the device or web interface according to your preference.
On the Device
To select the desired language, go to Settings > Language screen.
The device supports the following languages:
English, Traditional Chinese, Russian, Turkish, Simplified Chinese, Ukrainian, Arabic, and Persian.
On the Web Interface
You can switch the device's web language in the upper-right corner.
The device web interface supports the following languages:
English, Traditional Chinese, Russian, Turkish, Simplified Chinese, Ukrainian, Arabic, and Persian.
Change the LCD language on the Device > Time/Lang interface.
The device supports the following languages:
English, Traditional Chinese, Russian, Turkish, Simplified Chinese, Ukrainian, Arabic, and Persian.
Time
Time settings, including time zone, date and time format, and more, can be configured either on the device or the web interface.
On the Device
Set up time on the device Settings > Time screen.
Automatic Date Time: The automatic date is switched on by default, which allows the date & time to be automatically set up and synchronized with the default time zone and the Network Time Protocol(NTP) server. You can also set it up manually by switching off the automatic date and entering the time and date.
Time Zone: Select the specific time zone depending on where the device is used. The default time zone is GMT+0:00.
Date Format: Select the date format from the available options.
Time Format: Select a 12-hour or 24-hour time format.
Primary/Secondary NTP: Enter the NTP server address. The secondary NTP is the backup.
On the Web Interface
The time settings on the web interface allow you to configure the NTP server address for automatic time and date synchronization. Once a time zone is selected, the device will notify the NTP server of the chosen time zone, enabling it to synchronize the time zone settings on your device.
Navigate to Device > Time/Lang interface.
Automatic Date & Time: The automatic date is switched on by default, which allows the date & time to be automatically set up and synchronized with the default time zone and the Network Time Protocol(NTP) server. You can also set it up manually by switching off the automatic date and entering the time and date.
Time Format: Select a 12-hour or 24-hour time format.
Date Format: Select the date format from the available options.
Time Zone: Select the specific time zone depending on where the device is used. The default time zone is GMT+0:00.
Preferred Server: Enter the NTP server address.
Alternate Server: Enter the backup server address. When the main NTP server fails, it will change to the backup server automatically.
Update Interval: The time between sending the update request to the NTP server.