Language
Set up the language during initial device setup or later through the device or web interface according to your preference.
To select the LCD language, navigate to Setting > Time/Lang > LCD Language interface.
The supported languages are:
English, Simplified Chinese, Traditional Chinese, Russian, Korean, Spanish, Dutch, French, German, Hebrew, Polish, Turkish, and Ukrainian.
Switch the web language in the upper right corner.
The supported languages are:
English, Simplified Chinese, Traditional Chinese, Russian, Korean, Spanish, Dutch, French, German, and Polish.
Time
The time settings on the web interface allow you to configure the NTP server address for automatic time and date synchronization. Once a time zone is selected, the device will notify the NTP server of the chosen time zone, enabling it to synchronize the time zone settings on your device.
Set it up on the web Setting > Time/Lang interface.
Date Format: Select the date format from the provided options.
Time Format: Select a 12-hour or 24-hour time format.
Automatic Date & Time: The automatic date is switched on by default, which allows the date & time to be automatically set up and synchronized with the default time zone and the Network Time Protocol(NTP) server. You can also set it up manually by switching off the automatic date and entering the time and date.
Time Zone: Select the specific time zone depending on where the device is used. The default time zone is GMT+0:00.
Primary Server: Enter the NTP server address.
Secondary Server: Enter the backup server address. When the main NTP server fails, it will change to the backup server automatically.
Update Interval: Set the time update interval. For example, if you set it to 3600, the device will send a request to the NTP server for the time update every 3600 seconds.
System Time: Display the current device time.